User Manual

RECORDING-TRIGGER
                                                    A5000/A4000 • Chapter 6 RECORD Mode 159
Knob 1, 2
Same function as Cursor q (page 158).
Knob 3
[ Turn] Stop Trigger
Specifies the method to be used to stop recording in the
record standby display.
[Range] Manual, Edge/Manual
• Manual ... Recording can only be stopped by
pressing Knob 5 (>FINISH) or Knob 2
(>STOP).
• Edge/Manua ... Recording will stop automatically
when the input signal level drops below the
specified stop edge level (Knob 4). Recording
can also be stopped manually by pressing
Knob 5 (>FINISH) or Knob 2 (>STOP) in the
record standby display.
Knob 4
[ Turn] Stop Edge Level
Specifies the input level below which recording will be
automatically stopped.
Recording will stop automaticall the instant the input sig-
nal level drops below the Stop Edge Level in the record
standby display (but only if the Stop Trigger parameter
(Knob 3) is set to Edge/Manual).
[Range] 0 — 63
[ Press] QUICK...
Calls the quick entry menu (page 83).
Cursor e
Knob 1 Knob 2 Knob 3 Knob 4 Knob 5
Turn
action
Cursor — Stop Trigger
Stop Edge
Level
—
Press
action
Tree View MONITOR — QUICK... —
e
Cursor