User Manual

Effect Par ameter List
                                                              A5000/A4000 • Appendix 263
46: CHORUS, 48: CELESTE
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Delay modulation frequency
3 LFO Depth 0 — 127 Delay modulation depth
4 Feedback Level -63 — +63 Level at which the delay output is returned to the input (negative values invert the phase)
5 Delay Offset 0.0ms — 50.0ms Offset value for delay modulation
6 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
7 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
8 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
9 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
10 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
13 Input Mode mono/stereo Mono/stereo selection for the input
47: CHORUS2
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Delay modulation frequency
3 LFO Depth 0 — 127 Delay modulation depth
4 Feedback Level -63 — +63 Level at which the delay output is returned to the input (negative values invert the phase)
5 Delay Offset 0.0ms — 50.0ms Offset value for delay modulation
6 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
7 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
8 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
9 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
10 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
11 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
12 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
@13 Input Mode mono/stereo Mono/stereo selection for the input
49: SYMPHONIC
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of delay modulation
3 LFO Depth 0 — 127 Depth of delay modulation
4 Delay Offset 0.0ms — 50.0ms Delay modulation offset value
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
8 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
9 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
10 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
11 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
50: ENSEMBLE DETUNE
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 Detune -50cent — +50cent Amount by which the pitch will be detuned
3 Initial Delay Lch 0.0ms — 50.0ms Length of left channel delay
4 Initial Delay Rch 0.0ms — 50.0ms Length of right channel delay
5 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
6 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
7 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
8 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
51: FLANGER
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of delay modulation
3 LFO Depth 0 — 127 Depth of delay modulation
4 Feedback Level -63 — +63 Level at which delay output is returned to the input
5 Delay Offset 0.0ms — 50.0ms Offset value for delay modulation
6 LFOPhaseDifference -180deg — +180deg L/R phase difference of modulation waveform (no difference at 0 deg)
7 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
8 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
9 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
10 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
11 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
12 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
13 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range
52: V-FLANGER
1 Dry/Wet Balance D63>W — D=W — D<W63 Balance of the dry sound and effect sound
2 LFO Frequency 0.0Hz — 39.70Hz Frequency of delay modulation
@3 LFO Wave TriAngle,Sine,Random LFO waveform
4 LFO Depth 0 — 127 Depth of delay modulation
5 Feedback Level -63 — +63 Level at which delay output is returned to the input
6 Feedback High Damp 0.1 — 1.0 Adjust the high range attenuation (lower values will cause the high range to decay faster)
7 Delay Offset 0.09 — 36.21ms Offset value for delay modulation
8 Modulation Phase -180 — +180 Phase difference between the left and right channels waveforms
9 Analog Feel 0 — 10 Adjusts the analog feel
10 EQ Low Frequency 32Hz — 2.0kHz Frequency at which the EQ will boost/cut the low range
11 EQ Low Gain -12dB — +12dB Gain with which the EQ will boost/cut the low range
12 EQ Mid Frequency 100Hz — 10.0kHz Frequency at which the EQ will boost/cut the mid range
13 EQ Mid Gain -12dB — +12dB Gain with which the EQ will boost/cut the mid range
14 EQ Mid Width 1 — 12.0 Width of the mid range area which the EQ will boost/cut
15 EQ High Frequency 500Hz — 16.0kHz Frequency at which the EQ will boost/cut the high range
16 EQ High Gain -12dB — +12dB Gain with which the EQ will boost/cut the high range