RISK OF ELECTRIC SHOCK U0 MOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (0B BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL @ Explanation of Graphical Symbols The lightning Hash with arrowhead symbol, within an equilateral triangle, is intended 10 alert you to the presence of uninitiated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude ta constitute & risk of electric shock 1o persons.
1. Your CD-400 is a sophisticated electronic unit. To ensure proper operation, and ordain the best possible sound reproduction, please read this manual carefully. 2. Chase the installation location of your CO-400 carefully. Av aid placing it in direct sunlight or close © & sauce of heat. Also avoid locations subject to vibration or excessive dust, heat, cold. or moisture. Keep away rom such sources of hum as transformers or Moors. 3.
To protect the internal taser pick-up mechanism from excessive shock during trans, it has been secured by special transport screws, These screws are attached on the bottom -of the uni. Be sure to remove the transport screws before you turn your CD-400 on. Carefully place the unit an s deft side. Do not subject it to any shocks. 2. Use a Philips head screwdriver to remove the transport S Crews. 3. Place the screws in a safe place, perhaps with this manual, as they may be needed in the future. .
@ REPEAT ON/QFF Switch initiates automatic repeat playback of the entire disc, or of programmed disc selections. @ OPEN/CLOSE Key When pressed, slides the disc tray out of the unit (OPEN operation) or retracts the disc tray im0 the unit (CLOSE reparation, ®PLAY Key Initiates disc playback. @PROCRUSTES Key Pressing this key during payback wil temporarily interrupt operation of the unit (PAUSE).
1. Press the POWER switch. The MULTI-FUNCTION DISPLAY Panel will display & fasting dotted fine for a few seconds. This will change to the word “disc, Informing you that there is n disc loaded in the player. At this point, your CD-400 will only accept commands. from the OPEN/CLOSE kay. 2, Press the OPEN/CLOSE key.
The following display appears when the STOP mode s engaged and the laser re fums to the first track on the disc Track M. Stop mode Rice a disc is loaded and playback has begun, pressing the PASTORATE key once causes playback to PAUSE. The disc stops playing, but the current location of the laser pickup is maintained. Wren PAUSE, a dosed fine wil flash on the TRACK NO. display, o the colon between the trainees and seconds on the ELAPSED TIME display wil flash, according to which display bas been selected.
You may program your CD-400 to playback only contain tracks on a doss, in any order you wish 1o hear them, Up 1 9 selections can be programmed, or only one sanction. The player automatically inserts a 3 second audio blank space between playback of sate selection, Programming can be ane only when the dies is S Topped. To infer a program you use the PROGRAM kay and the Skip Contralto keys. 1.
Please note that the index marks cannot be used with programmed playback 1. First enter the STOP mode. 2. Defect the desired ack number with the Skip Contort keys. 3. Crass the Search Central keys { = for forward and < for reverse) to move to an index mark. The INDEX SEARCH indicator on the display panel wil it, and the misplay will change to show both the TRACK NO. and the INDEX number within that track 4, Continue pressing the Search Control keys to locate tha desired index mark.
