= RISK BF ELECTRIC SHOCK: 50 Hat oPE CAUTION: TO REDUCE THE RISK OF # ELECTRIC SHOCK, DO NOT REMOVE & COVER {OR BACK). NO USER SERVICEABLE & PARTS INSIDE. REFER SERVICING TG B ¥ QUALIFIED SERVICE PERSONNEL.
g Ch-45 & POWER Switch power 0 your CD-450. K there is a disc in the way. the player will begin playback from the first defection when power is wined on & Disc Tray Holds & compact dais for playing, Sides out tor loading and loading when the OPEN/CLOSE switch is pressed. © MULTI FUNCTION DISPLAY Panel Provides comprehensive information on dies selections, disc playback status. player propelling status. and all paragraph: ding procedures.
3) REPEAT Arneb Key Used to set staring and ending points for repels playback. Outing play. bushing this key wil cause te REMOTE CONTROL SIGNAL indicator on the CD-B fa flash once s the Repeat Play Indicator to light, The point where the ey wes pushed will b point A, Pushing the key once more Witt caves “he REMOTE CONTROL SIGNAL Indicator to dash once more, This wil be port B. Play will Thea courteous to tempest beehives points A and B.
LINE OUT o 2. AC Power Cord Use these jacks to connect your CLAM fo dn, Connect this ord to & wall AC gauntlet, or to the power outlast receiver. They should be connected to the DAD, TIF, of an your amplifier, tuner, timer, efo Aux input jacks. If these jacks are nol available, use the TUNER or TAPE PLAY jacks. 00 NOT use the PHONON input jacks. Make sure all AC power is off when making these contractions. There are only two connections to make from your CR-450: the AC power cord and the two LINE QUT jacks.
. Press the POWER switch. The MULTIPLICATION DISPLAY Panel will display a dashing dotted line for few seconds. This wil change 1o the word “disc, informing you that there i no dies loaded in the player, At this port, your CD-450 wil only accept commands from the ENCYCLOPEDIC key . Crass the CLOSENESS Key. The dies tray wil side out from the uni, and the display will change to the word TOPEE.
D-45 and confirmed on e display (dis C. OPEN, FLAY, and Enact, and all disc search operations are confirmed with aah operation The panel also insides indicators to confirm REPEAT PLAY, REPEAT A-B PLAY, INDEX SEARCH. INDEX playback, and Remote Contra! operation The following display appears when the STOP mode is engage and the laser recurs 1o the first track en the disc. arcs Nee & dist is faded and playback has begun, pressing the PAUSE/STOP key one Causes playback to PAUSE.
You ray program your CD-450 to playback only certain wacks on a disc, in any order you wish 10 gar them. Up 10 9 selections can be programmed, or only one selection, The player automatically insets A 3 second audio blank space o playback of each selection. Programming can e done troy whee the dies i Stopped Yo mermen 4 program you use the PROGRAM key and the Skip Control keys. 1. Press the move the on the doss. A USE/STOP key to STOP p pickup to the beginning of hack and fie first select 2.
