SAFETY INSTRUCTIONS [T RUSH OF ELECTRIC SHOCK BG MOT PEN CAUTION: TQ REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER {OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TG QUALIFIED SERVICE PERSONNEL. « Profanation of Graphical Symbols The lightning dash with towhead symbol, whiny an equilateral) tingle, is intended 10 alert you 10 the presence of uninitiated “dangerous volage™ within the product’s enclosure that may be of sufficient magnitude o constitute 2 Fisk of electric shank o parsons.
CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Inst alt your unit in a cool, dry, clean place — away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum transformers, motors). To prevent fire or electrical shock, do not expose o rain and water. 3 Do not operate the unit upside-down. it may overheat, possibly causing damage.
® Before making any connections, switch OFF the power to the unit and the amplifier or other component. @ Connect either the LINE OUT analog output terminals, or the DIGITAL OUT terminal, to the amplifier to be used. LINE OUT e ETHEREAL OUT ® Connections should be made to the correct input terminals of the amplifier or other component. ® If the placement of this unit causes noise to other equipment, such as a tuner, use them farther away from sate the.
FRONT PANEL Disc-select buttons TIME display mode-elect button Disc tray L POWER switch OPEN/CLOSE button Disc play MODE-select butt DIGITAL EQUALIZER bunions STOP button PAUSE bunion DISC SKIP button { ! Numeric buttons Remote-control sensor Display panel REMOTE CONTROL TRANSMITTER * The control functions on the main unit and on the remote-control transmitter are virtually identical, with the exceptions described below.
Johannesburg Labs side 5 Select the disc play mode (DISC MODE: SINGLE or ALL) while watching the display. Shows the selected disc mode. “SINGLE" modes: The unit will play a designated disc only. “ALL" mode: The unit will play all discs in the tray in sequence. necessary, select a desired disc by using a Disc select button or the DISC SKIP button.
wrasse * To resume play, press the PAUSE button again or press the PLAY bunion. DIRECT PLAY Select a desired track by using the numeric buttons. ¥ disc T @>Z>a 3 4 5 Lethe selected track Hegemony T+ number is displayed. SAGE Example: To select track 25 1. Press (D) twice. 2. Soon press @ incs. ffié@@féé@éé * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
To advance rapidly ® The music can be heard (although slightly garbled) swing annual search in either direction. This is convenient for locating a precise position within a track, << SEARCH Db or for reviewing the contents quickly. # When manual search in dither direction is initiated (press and hold) during the pause mode, the action is the same, but no sound is heard.
You can have tracks played In a random sequence {up io 99 fracks). The unit will automatically mix up tracks from aff discs or any desired disc in the disc tray. Select whether to play one disc or all discs in the tray. DIME * f the “SINGLE” dist play mode s selected, next select a desired disc by using the DISC SKIP mutton or a DISC-select bunion, 4 RANDOM To cancel random-sequence play Press the STOP button or RANDOM button once again, or open the disc tray by pressing the OPEN/CLOSE button.
You can enjoy listening to your favorite tracks (or discs) in any desired order by a programmed play. Different types of programmed play can be performed according to whether the unit is in the “SINGLE” disc play mode or “ALL” disc play mode. B In the “SINGLE” disc play mode: You can program tracks of a designated disc in any desired order. In addition, the DIGITAL EQUALIZER-mode selected at each track selection can he also programmed.
i In the “ALL” disc play mode: You can program favorite tracks selected from ail discs on the disc tray in any desired order. in addition, the DIGITAL EQUALIZER-mode defected at each track selection can be also programmed, 5 4275 ool set the unit in the stop mode. 5 If necessary, select the desired disc. met Or e or e s MEED WISE MODE i ALL I VN 6 Select the desired track. 3 revs 4 * Repeat steps 4, & and 6 to set more programs. if necessary, select any desired Equalizer mode.
To stop program play To check programmed data Press the STOP button. The first track number 1. i the unit is in the play mods, press the STOP programmed will be displayed. butter, Yo resume play, press the PLAY bunion. Play begins from 2. Press the PRIG bunion, the beginning of the program. 3. Each time the SKIP == button is then pressed, the track numbers and sequential order of the programmed tracks can be checked one after another.
Notes e Program data filed in this way can be retained for about wo weeks, even with the power switched off. #® One-program data can be filed for any one disc. i different program data is filed for a disc, the previous program data wiki be deleted from the file, and only the new program data will be retained in the file. ® Program data for a total of as many as about 100 discs can be filed at any ong time. To play with program data 3 if “FILE” is not #laminated in the display, press the FILE button.
You can play any desired track or disc (set of discs) repeatedly by pressing the REPEAT button. The repeat-play mode wiki change whenever you press the REPEAT bunion. SINGLE REPEAT fig’xfi Only a designated track is played repeatedly. OFF FULL REPEAT * in the “SINGLE" disc play mode: A designated disc is Rep Ear played repeatedly. DECIDE tingle career in the "ALL" disc play mode: All discs in the disc tray are BANGLE ALL played repeatedly.
s A first, determine which CDC-805 is 1o be used as the main unit {or the second one). Connections should be made as shown in the following figure, Maintain Set to the “MAIN™ side Remote control cable {included) 2nd unit Sel to the “2nd™ side. e The 2nd/MAIN switch should be set while the unis are e It is impossible to activate the relay play by connecting in the power-off mode. the DIGITAL OUT terminals to each other.
Notes ® In the relay play, one unit is in the “functioning” mode and the other in the “waiting” made. peas swine % The display like this shows that the unit is in the “waiting” mode. # In the "SINGLE" disc play-mode, a wailing dime for the alternation of discs is shorter than the "ALL" disc playmate, ® By setting the prows of one unit off, you can activate another unit normally {without relay play).
NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Battery replacement if the remote-control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes: © Use only “AAA” (RO3) batteries for replacement. & Be sure the polarities are correct. (See the illustration inside the battery compartment.
TROUBLESHOOTING 1f the uni falls to operate normally, check the following points 1o determine whether the problem can be corrected by the simple. measures suggested. I It lanolin, or if the problem is not listed in the SYMPTOM column, disconnect the unit's power cord and contact your dealer or service center for assistance. SYMPTOM PROBABLE CAUSE REMEDY ‘The player does not switch ON when the POWER switch impressed. ‘connects.
