CAUTION: TO EDUCE THE RISK OF ELECTRIC HOTKEY, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL & Explanation ot Graphical Cymbals The lightning Hash with arrowhead ' symbol, within an equilateral triangle, ‘ s intended 1o ale Rt you to the presence of insulated “dangerous voltage” within the product's enclosure that tray be of sufficient magnitude to constitute a risk of electric shoe to persons.
18 Damage Requiring Service — The appliance should be serviced by qualified service personnel when: A, The power-supply cord or the plug has been damaged; or B. Objects have fallen, or liquid has been spilled into the appliance; or C. The appliance has been exposed ta rain; or D. The appliance does not appear {0 operate normally or exhibits a marked change in performance; or E. The appliance has been dropped. or the cabinet damaged.
CAUTION ~ USE OF CONTROLS, ADJUSTMENTS, OR # Your unit has been specifically designed for the reproduction of PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED compact discs bearing the “ ([ HEREIN, MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. loaded into the player & To remove g disc from its storage case, press down on the center of THE UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE the opened case and ift the disc oul carefully, holding it by the edges. EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.
@ Although minute dust particles and finger prints should have no effect & Never use record cleaner, record spray, anti static sprays or liquids, or on play, you should keep the recorded side surface of your discs clean any chemical-based liquid to clean the surface of a disc as these may by wiping them with a clean, dry cloth. Wipe in a straight motion from irreparably damage the disc’s plastic case, the inside to the curbside. Do not wipe i a circular motion.
FRONT PANEL & Disc tray Place a disc on the tray with its label surface upwards. @ Display window E;;fl_g = REPEAT SR TOE THEE | 'Pl‘aw ser DISC indicator Lights when a disc is loaded. When ne or an improperly placed disc has been loaded into the tray, the indicator flashes, @) TRACK display Shows this frack number of a selection. @ Time display REMAIN TIME: Shows the remaining play time of the disc or programmed selections, TOTAL TIME: Shows the toll play time of the disc or programmed selections.
& SKIP/10 MIN. (i
® Switch OFF the power to all equipment before making any connection, To connect an amplifier or receiver and be sure to connect the cables with the correct Right and Left Connect the LINE OUT jacks to the CD(or AUX} jacks on the rear panel of channel reflations. your amplifier or receiver. If your amplifier is not equipped with these ® The names given to the jacks may vary depending on the equipment terminals, connect to the TAPE PB jacks. For details, refer to the Owner's When making connections.
1. Press the POWER switch 1o turn the unit ON. 2. Press the OPEN/CLOSE button to open the disc tray. 3. Place a compact disc on the disc tray with the label side up. Check that the disc is resting at the center of the disc tray. 4. When the OPEN/CLOSE bunion is pressed again, the disc tray closes. 5. The unit operates for several seconds to read the disc's contents, the TRACK display displays the total number of tracks, and the time display displays the total playing time for a few seconds.
To begin disc play from a desired track, select the desired stetting track nurturer using the SKIP M or b button in stop or pause mode. Press the PLAY button and play will begin at that track. When the player is already in play mode and you wish lo move to a different track, select the new track number using the SKIP [eid or pi#| button. The selected track number will be displayed and play will begin at that track.
1 FAST FORWARD MANUAL SEARCH During play, when the SEARCH B8 button is pressed, play will be advanced rapidly while this button is kept pressed. B FAST REVERSE MANUAL SEARCH During play, when the SEARCH <4 bunion is pressed, play will be tacit reversed while this button is kept pressed ® During a manual search operation, when you have found the desired part of a selection, release the SEARCH &< or B# bunion and normal play will begin from that point.
B PROGRAM PLAY 1 Press the PAUSE/STOP button twice to set the player into stop mode. . Press the PROGRAM/TAPE PRIG SET bunion. The PROGRAM indicator lights and “P-01" appears on the display. Select the desired tune 1o be played first with the SKIP [ or bie] button and press the PROGRAM/TAPE PRIG SET button. "P-02" appears on the display. Select the desired tune to be played next with SKIP & or B button and press the PROGRAM/TAPE PRIG SET button, “P-03" appears on the display.
3 . Press the PLAY button to start play and set the tape deck to record mode When all tunes to be recorded on side A of the tape are finished, the player deniers pause mode. When the player enters pause mode, tum the tape over. To resume play, press the PLAY button and set ihe tape deck to record mode. To stop a recording in process, press the stop button of the tape deck and pass the PAUSE/STOP button of the player. After all programmed tunes are recorded, the player enters stop mode.
B SINGLE REPEAT PLAY Press the REPEAT Hutton once. The REPEAT 8 indicator fights and the displayed selection is played repeatedly. R To release single repeat play, press the REPEAT button twice. ® |f the SEARCH <44 or Bd button is kept pressed over the past of the selection 10 be repeated, the newly displayed selection is repeatedly played. B FULL REPEAT PLAY Press the REPEAT button twice.
If your unit fails fo operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested, If it cannot, ¢r if the fault is not sifted in the SYMPTOM column, disconnect the player's power cord and contact your dealer or service center for help. IR R The power cord is not plugged in or completely incensed. ‘The player falls to turn on when th POWER switch is pressed. . e fie Firmly plug in the power cord. The disc tray does not close completely.
AUDIO SECTION Frequency Response DE-Emphasis Equalization Harmonic Distortion -+ Noels 8/N Ratio Dynamic Range Wow & Flutter .. Output Collage .. Output impedance Headphone Cupful kHz, 205 dB +0.5 dB . Less than 0.008% {1 kHz} . 100 dB More than 86 dB . Measurable INTERNAL SYSTEM Optical Picic-upg Fervor Correction System 3-beam laser CIR GENERAL Power Requirements Power Consumption .. Dimensions 120V, AC 60 Hz 436 % 107 x 344 mm X x 48kg (10 1bs. 9 oz) Pin plug cord Weight ..
