User Manual

CS1D Operating Manual (Basic Operation)

Basic operation of the SELECTED OUTPUT CHANNEL block

This section explains how to use the SELECTED OUTPUT CHANNEL block to control an output channel. In the

SELECTED OUTPUT CHANNEL block, you can select one channel from the MIX channels, MATRIX channels, or L/R

of the STEREO A/B channels, and use the EQ and compressor to process the signal before outputting it to an output unit

or to another bus.

Controls and functions of the SELECTED OUTPUT CHANNEL block

The controls and functions of the SELECTED OUTPUT CHANNEL block are summarized below.

COMPRESSOR

EQ ON

EQUALIZER

DELAY section

Make settings for the internal delay function.

COMPRESSOR section

Make settings for the internal compressor.

EQUALIZER section

Make settings for the internal 6 band EQ (HIGH, HIGH MID,

MID, LOW MID, LOW, SUB LOW).