User Manual

106
Chapter 9. Recall safe/Mute safe
This chapter explains the “Recall Safe” function that excludes specific channels or parameters from recall operations, and
the “Mute Safe” screen that excludes specific channels from mute operations.
Recall safe
“Recall Safe” is a function that allows you to specify certain channels or parameters to remain unaffected when a scene is
recalled. For example if you specify Recall Safe for a channel that you always want to control manually, the parameters of
that channel will not change even when a new scene is recalled.
There are two ways to set a channel to Recall Safe; you can use the top panel of the console, or you can use a function
within the display.
Using the console to set/defeat Recall Safe
Here’s how to use the top panel of the console to set/defeat Recall Safe. This method is convenient when you wish to tem-
porarily operate only a specific channel manually.
[Procedure]
1. Use the [SEL] switches to select the channel for
which you wish to select Recall Safe.
You can select input channels (input channels, ST IN
channels) or output channels (MIX channels,
MATRIX channels, STEREO A/B channels).
2. If you selected an input channel in step 1, press the
SAFE [RECALL] switch located in the SAFE section
of the SELECTED INPUT CHANNEL block.
3. If you selected an output channel in step 1, press
the SAFE [RECALL] switch located in the SAFE sec-
tion of the SELECTED OUTPUT CHANNEL block.
In either case, the SAFE [RECALL] switch LED will
light, and the corresponding channel will be set to
Recall Safe. As desired, make settings for other chan-
nels in the same way.
4. To defeat Recall Safe, use the [SEL] switches to
access the corresponding channel, and press the
SAFE [RECALL] switch once again.
The SAFE [RECALL] switch LED will go dark, and
Recall Safe will be defeated for that channel.
DCA
SAFE
A
NNEL
SELECTED INPUT CHANNEL
block
SAFE
[RECALL]
switch
DCA
SAFE
SELECTED OUTPUT
CHANNEL block
SAFE [RECALL]
switch