User Manual

9
DTX Version 2.0 — System Upgrade Information Guide
1 DTX Drum Trigger Module (Power Adapter PA-1207)
2 Snare (TP80S)
Use the stereo cable enclosed in the TP80S package and connect to
1 SNARE.
*Connect the L-shaped side of the plug to the TP80S. (This applies
to all connections hereunder.)
3 Tom 1 (TP80)
Use the monaural cable enclosed in the TP80 package and connect
to 2 TOM1.
4 Tom 2 (TP80)
Use the monaural cable enclosed in the TP80 package and connect
to 3 TOM2.
5 Tom 3 (TP80)
Use the monaural cable enclosed in the TP80 package and connect
to 4 TOM3.
6 Hi-hat (TP80)
Use the monaural cable enclosed in the TP80 package and connect
to 8 H.HAT.
7 Side Cymbal (PCY80S)
Use the stereo cable enclosed in the PCY80S package and connect
to 7 CRASH.
8 Top Cymbal (PCY80)
Use the monaural cable enclosed in the PCY80 package and connect
to 6 RIDE.
9 Hi-hat Controller (HH80)
Use the stereo cable enclosed in the HH80 package and connect to
H.HAT CONTROL.
) Kick Pad (KP80)
Use the monaural cable enclosed in the KP80 package and connect
to 10/9 KICK.
*An explanation is also available on P.9 of the Owner's Manual.
Stereo Plug Monaural Plug
TP80S
PCY80S
HH80
TP80
PCY80
KP80
DTX Rear Panel
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
Frequently Asked Questions
The following is a summary of cautions and solutions in response to frequently asked questions (FAQ) from previous
DTX users.
Connecting the DTX with Each Pad (Standard Set)
1
2
34
5
6
78
9
)