User Manual

12
DTX Version 2.0 — System Upgrade Information Guide
Setting the Tone for the Bass Voice
The following are two ways of setting the tones for a bass
voice to be generated by playing the pads.
Using a GM Keyboard Voice
! Set the MIDI channel (Chan=) for each part (1st to 5th,
mut, rim) in the 13th display page (Owner's Manual P.
42) Note=(MIDI channel) of Drum Kit Trigger Edit
mode to a channel besides 10.
n Channel 10 is a drum voice exclusive channel and
it is possible to use GM keyboard voices by selecting other
channels.
n It is possible to set a MIDI channel separately for
each note (1st to 5th, mut, rim) as well as set channel 10 to
combine drum voices.
" Set the program change number (voice number) of the
voices for each channel in the PC Ch= (send program
change) focus area on the 16th page of Drum Kit Voice
Edit mode (Owner's Manual P. 59). This operation
determines the keyboard voice corresponding to each
note set in step ! above.
n Program change numbers 1 to 128 correspond to
each voice number 1 to 128. For details, refer to the GM
keyboard voice list (Owner's Manual P. 147).
# Set the note number and note name of each note (1st to
5th, mut, rim) in the Note= (note number 1 to 5) focus
area on the 11th page of Drum Kit Trigger Edit mode
(Owner's Manual P. 40). This operation determines the
tone of the keyboard voice set to each note.
n Half tones are assigned to note numbers 0 to 127.
For details refer to the relation between note number and
keyboard (Owner's Manual P. 41).
Using a Drum Voice
! Set the note number and MIDI channel (Chan=) of each
note (1st to 5th, mut, rim) in the Note= (MIDI channel)
focus area on the 13th page of Drum Kit Trigger Edit
mode (Owner's Manual P. 42).
" Set the same drum voice to the necessary number of
MIDI note numbers by hitting the pad in the VCE (voice)
focus area on the 1st page of Drum Kit Voice Edit mode
(Owner's Manual P. 53).
n The drum voice list is available on P.16, Owner's
Manual P.148.
n This operation only creates a corresponding list
between the MIDI note number and the drum voices and
does not specify the tone.
n Avoid setting or changing drum voices which
correspond to the note number used by other pads (input).
This will change the drum voice when the pad is played.
# Set the pitch of each MIDI note number with the same
drum voice set in step " above in the Pitch focus area
on the 4th page of Drum Kit Voice Edit mode (Owner's
Manual P. 54). This operation determines the tone of
the drum voice set to each MIDI note number.
n Since it is difficult to set the tone with numbers,
confirm it by actually playing it.
$ Set the note number (note name), with set voices and
tones in steps ! and " above, of each note (1st to 5th,
mut, rim) in the Note= (note number 1 to 5) focus area
on the 11th page of Drum Kit Trigger Edit mode
(Owner's Manual P. 40). This operation determines the
drum voice and tone of each note. As a result, if you hit
this pad, the drum voices of each note will be generated
in different tones.
n Depending on the Key Off mode settings, the length
of the generated sounds may be extremely long or short.
In such a case, check the settings on the Key Off focus
area (Owner's Manual P. 58) on the 11th display page of
Drum Kit Voice Edit mode.