User Manual

5
DTX Version 2.0 — System Upgrade Information Guide
7 PanCh (channel pan)
This sets the pan (stereo pan position of the sound)
assigned to each MIDI channel within the currently
selected song. This defines the pan position of the
sound of each channel between the left and right.
This function enables you to adjust the stereo pan
position of the tracks within a recorded song.
Furthermore, the channel 10 drum kit pan will be
adjusted on the 3rd display page of Drum Kit Voice
Edit mode (Owner's Manual P.54) and here we will
be describing how to set channels 1 to 9 and 11 to
16.
1 Move the cursor to the Channel focus area and
rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to choose the channel
number.
2 Move the cursor to the Pan focus area and rotate
the Data Scroll Wheel or use the +1/YES and -1/
NO buttons to set the pan.
3 Repeat steps 1 and 2 and set the pan of each
channel.
SONG
MISC.
SNARE
KICK
CYMBAL
PanCh= 1
= center
Pan
Channel
Settings:
The following values can be set to channels 1
to 9 and 11 to 16.
L64 (=far left) to L1, center, R1 to R63 (=far
right)
Song Job Mode
6 VolCh (channel volume)
This sets the performance volume of each MIDI
channel within the currently selected song. This
function enables you to adjust the volume balance
among the tracks within a song which has been
recorded.
1 Move the cursor to the Channel focus area and
rotate the Data Scroll Wheel or use the +1/YES
and -1/NO buttons to choose the channel
number.
2 Move the cursor to the Volume focus area and
rotate the Data Scroll Wheel or use the, +1/YES
and -1/NO buttons to adjust the volume.
3 Repeat steps 1 and 2 and set the volume of
each channel.
SONG
MISC.
SNARE
KICK
CYMBAL
VolCh= 1
= 95
Volume
Channel
Settings:
The following values can be set to each
channel 1 to 16.
0 to 127