User Manual

34
Adjusting the graphic equalizer
for your desired sound taste
The 7 band graphic equalizer allows you to adjust the level
for each frequency band.
* Make adjustment by monitoring the equalizer level
indicators on the display.
1 Playback a source. (For source playback, refer to the
sections beginning on page 10.)
2 Press the equalizer control or button once or
more to select the frequency band to which you will adjust
the level.
* The selected frequency band is shown on the display.
* The scale bar of the selected frequency band on the
graphic equalizer level indicators will flash.
3 Press the equalizer control or button once or
more to adjust the level.
4 In the same way, make adjustment for other frequency
band.
Turning the equalizer to “flat” (the
state with no equalization applied)
There are two ways as follows:
• Press the FLAT button on the remote control transmitter.
* Pressing the FLAT button once more will restore the
pattern which had been selected before it was turned to
“flat”.
• Press the MUSIC button and the LOCATION button on the
front panel at the same time.
GRAPHIC EQUALIZER/SOUND FIELD PROCESSOR CONTROL
3
60 150 400 1K 2.5K 6K 15K
2
-
+
12345
12345
678
67890
ABCDE
TIME
PROG TAPE EDIT
+
I0
STOP PLAY/PAUSE DISC SKIP
RANDOM
TUNER
TAPE
PLAY STOP
REC/PAUSE
SLEEPPOWER VOLUME
DECK
CD / TUNER
A/B
MODE OPEN/CLOSE
INPUT
USER
REPEAT
LOCATION
PLAY
MUSIC
FLAT
2
3
FLAT