TURBOFANS 21100 Rs Bl DEFEAT T WINIFRED TRAINEE. 4. This units a sophisticated stereo cassette deck. To ensure proper operation for the best possible performance, please read this manual carefully. 2. Choose the on location of your unit carefully. Avoid placing heat. Also avoid locations subject to vibration and excessive dust, heat, cold or moisture. Keep it away from sources of hum such as transformers or motors. 3. Do not open the cabinet as this may result in damage to the deck or electrical shock.
FEATURES . [CONNECTIONS ] [PLAYBACK | SELECTION SEARCH . [RELAY PLAYBACK | [RECORDING ] SYNCHRONIZED RECORDING FUNCTION [AUTO REC MUTE OPERATION REC RETURN OPERATION ] VARIOUS FUNCTIONS HELPFUL RELAY RECORDING DUAL RECORDING .. [Dubbin G .
Amplifier or receiver REAR PANEL CONNECTIONS take sure that power to both the deck and your amplifier/ receiver are furred off before making any connection, @ The White plug on the paired connecting cables corresponds to the Left channel and the Red plug corresponds to the Right channel.
Preparation for playback Tum on the POWER switch. Set your amplifier to cassette deck function mode. POWER switch A_ PLAY TRIM N b COUNTER RESET DB/ C indicators Make sure that the tape is wound 1o the right-hand reel with the cassette placed on the tray. on the display. DOLBY NR Off Pace the cassette on ths cassette Press the DECK | Seethe DOLBY | Select the tape running | Neatness tray with the exposed tape side AB button to Nf button, direction for DECK Aor | REVERSE facing back side of the unit.
Tape remain Tape running| ape tuning orator indicators for indicators for indicator for DECK A UNKNOWN > Um QA B DECK B Electronic tape fi_.u Electronic tape counter A DUBBING -~ B> counter 5 HIGH Jeri tor DECK A fer whelm RECREANT 1J 11 for DECK _II REVERSE MODE indicator Peak level maters: Indicate the peaks of the signal levels during recording and playback over range. There are separate meters for each loft and right channel.
THEMSELVES MODE DECK AB MUTE/ STOP PLAY SEARCH Load the cassette tapes info Decks A and 8, and set the REVERSE MODE button to the 2> RELAY made To search for the next selection Start playback of DECK A. When the 1> tape When the < tape REVERSE running indicator is lit: running Indicator is lit; 4 MUTE/ MUTES SEARCH o SEARCH 7~ 7N N The ci> RELAY indicator will be lit, and relay playback The liftoff buttons and the MUTE/SEARCH mode starts.
Preparation for recording & Turn on the POWER switch. ® Set your amplifier fo cassette deck function mode. REC indicator POWER switch 3 BB/ © indicators Peak Laval melees Place the cassette on the cassette tray with the exposed taps racing back side of the unit. When setting the side to be recorded facing up, select forward pale running direction {c-) {in step 4, To load the cassettes tray, press the & button, Press the DECK A/B button to select the deck to be operated.
Tape remain Tape remain indicator for taro for DECK A DECK B | | Electronic tape Electronic tape counter counter for DECK A L= DUBBING -cjBr|y Ial) for DECK B A RRE T O O REC indicate for DECK Lights during rec sound muted section s recorded, DUBAI © indicators Peak elev! meters: Indicate the peaks of the signal levels during recording and playback over range. There are separable meters for each left and right channel. These level morels have a peak hold function which hoods the peak level for about 1.
CHROME MGt S oAl 2 ; .fi When operating this unit in combination with the YAMAHA CD Player which has SYNCHRONY button on its remote control transmitter, CD Synchronized recording function can be utilized. This function is operated with the remote control transmitter of the GD Player and effective for the deck selected with the DECK A/8 button. {Regarding the operation, refer to the manual of the CD Player.
rile wen e g can be made sequentially on Decks A and B. Start the relay recording always from the cassette in DECK A 1 Insert cassette tapes in both Decks A and B. 2 Press the DECK A/B to select DECK A. (The DECK A indicator fights on the display.
Preparation for dubbing 2 Turn on the POWER switch. + Set your amplifier to cassette deck function mode. ® Open the cassette compartments by pressing the EJECT buttons and load a blank cassette tape in DECK A and the original cassette tape in DECK B. 3 2 NORMALITY indicators % gorge 2 CECA REVERSE < OWED DIRECTION ¢ 3 £UB MODE Rt . “The compounding NORM or HIGH ) indicator gilts on the display.
With a commercially available audio timer it is possible to make recordings and initiate playback automatically at any time, Make sure that all power cord conclusions between the timer and amplifier/receiver are properly made. TIMER For details, refer to the instructions of your audio dimer, No change in any of the other connections between the deck and oversimplification, of, is necessary.
CASSETTE TAPES There are many different types of cassette tapes available. However, they all conform to standard specifications so any brand may be used with the deck. Classification of Cassette Tapes by Formulation Cassatt tapes are available in four basic types depending on their formulation, or type of magnetic material and manufacturing process.
CLEANING OF THE TAPE PATH DEMAGNETIZATION Continued high quality performance of your deck is After 20-30 hours of use, enough residual magnetism will dependent upon periodic cleaning of the heads, capstan, build up on the heads to cause poor high frequency pinch rifler, and all surfaces over which the tape travels. reproduction. At this time you should use a commercially Normal use will cause an accumulation of and dust on available cassette-shaped head demagnetize. the heads, capstans, and pinch offers.
It your cassette deck fails to operate normally, check the following table measures which you can take to correct the problem. 1t lists common operating errors and simple cannot be corrected, or the symptom is not listed, deck’s power cord and contact your authorized YAMAHA dealer or service center for help. SR . R fiafifi« e lse Cal e 4 Lfilrfi. e S ..v.s . Taps is damaged of of poor quality. Tape doesn’t move in recording or ® Power plug is not properly plugged in. « As insert noncom uauoqz. playback.
mosey s muffled and high A tape mama without Dolby NFi is Playback in omm u8_5? frequencies are inaudible. played back with Dolby NR on. Heads are dirty. Clean heads and carry out Heads are magnetized. demagnetization with head demagnetize. When playing back tapes recorded on Basic levels are different for different “This is not a fault. other decks, meter deflections are cassette decks. greater (smaller} than when recording. e ‘Track Configuration .4 track, 2 channel stereo GENERAL Motor ..o .
