INTRODUCING THE P2040 The Yamaha P2040 has four completely independent power amplifier channels that deliver up to 20 watts RMS into 8-ohm loads. If you have an application that doesn’t require all four channels, flipping a rear-panel switch instantly shifts the P2040 into the 2-channel mode providing a stereo power amplifier which puts out 40 watts RMS per channel into 8-ohm loads.
PRECAUTIONS 1. AVOID EXCESSIVE HEAT, HUMIDITY, DUST AND VIBRATION Keep the unit away from locations where it is likely to be exposed 1o unusually high temperatures or humidity, Also avoid locations which are subject to excessive dust accumulation or vibration which could cause mechanical damage. 2. AVOID PHYSICAL SHOCKS Strong physical shocks to the unit can cause damage, Han idle it with care. 3.
OPERATION FRONT PANEL: €@ POWER Switch & Indicator Cross the power switch in: to turn power ON, and press ‘again 1o turn the power OFF, The POWER LED dimmed: lately #above the power switch Wil light when the power is ON. CAUTION The power amplifier should Bethe LAST piece of ague. men: turned or in any system; This is to avoid damage to the power amplifier and speakers due {0 power surge.
