RISK OF ELECTRIC SHOCK| b NOT PORE CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVERS {OR BACK), NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The fighting flash with arrowhead symbol, within sn equilateral triangle, is intended to alert you 1o the presence ot insulated “dangerous voltage’ Z within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock 1@ persons.
Be sure o connect the toff (L} and right (R} channels consistently from competent to component.
. Connect the cords going to the . Push in on CONNECTING THE SPEAKERS theft speakers 1o the L. terminals and the right speaker cords ta tha A terminals, making sure that the “4” and .. markings i absurdness, 1 the "+ and receives are reversed at dither speaker, the sound will be unnatural and lack s, Speaker cords should be cut as short as possible; 5 nat coil up Excess wire on the floor, Also, da not birdie with cords from other system components.
& POWER SWITCH This it 8 "push-on, pah-off” type power switch. Turing the POWER switch on tunes in the frequency of the station distracted before the Power switch wes turned off s lights the corresponding indicators.
TUNING MODE SWITCH ® AUTO he tuner is in auto-search tuning mode. Pressing Tuning button automatically twines in the st station in the lactated direction. Normally 186 switch should be sift in this meed, FM misting Is active while searching, @ AMONG The tuner is in manual tuning mode, in addition, FM mut. ing Is Active, allowing extremely weak stations to be received.
Antipathy is an effect similar 1o television ghosting; it distorts the received signal and USAF causes Pane stern separation and noise. As show in fig. radio waves which travel directly from the transmitter to the receiving antenna are mixed with waves which reflect oft nearby abject such s buildings. Because the path talon by the refined waves is longer than the direct path, the teems required for the waves to arrive at the antenna is also anger.
& LISTENING TO FM BROADCASTS 1. Set the Input selector to Tuner. 2. Crass the Band selector 1o select FM. 3. Set the Tuning Mode switch 10 “Saute. 4. Cross either the Up or the Down side of the Tuning button for 2 or 3 absconds. The receiver will auto creativity scan tf band in the selected direction.
