[RISK OF ELECTRIC SHOCK | DO HOT OPEN CAUTION: YO REDUCE THE RISK OF ELECTRIC SHOT, DO NOT REMOVE COVER {OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle. is intended to alert you 1o the prance of insulated "“dangerous voltage” Z within the product's enclosure that may be ot sufficient magnitude (o constitute a risk of electric shock 1o PRISONS.
| Direction of broadcasting station (R poor with c 10 meter insulated {Economics e AM Soap assonants { provided (in Jt may be from its bracket i€ desired o Iaccoca i at a distance from the set. sure to connect the left (L} and right {R} kennels consistently from component to component. L Speaker A & Speaker 8 A anon Unpunished power can be supplied to another component with power consumption of up to 200w flat twin-lead.
# CONNECTING THE SPEAKERS 1. Connect the cords going 1o the deft speakers 1o the L terminals and the tight speaker cords to the ] terminals, making sure that the and " markings are observer. I the "+ and wires are reversed at either speaker, the sound will be unnatural end lack sass. Speaker cords should,be cut a3 short os possible; o not roll up excess wits on the Hood, Else, do not b indie with cords from other system components. 2.
© POWER SWITCH This i3 a “push-on, push-off* type power switch. Earning the POWER switch on tunes in the frequency of the station selected before the Power switch was wurst off ord lights e corresponding indicators @ TUNING MODE INDICATOR The AUTO indicator lights when the TUNING MODE key € is set to AUTO, and seaming off when the TUNING MODE Key is set 10 MAN'L.
@ BAND SELECTOR This facts either M or AM broadcasts. @ TUNING MODE SWITCH s AUTO The tuna is in ate-search tuning mode. Pressing Tuning key automatically tunes in the first station in the selected direction, Normally the switch should be theft in this made.
Set Loudness to the Fiat position and increase the Volume ta loudest label desired. Turn Loudness control knob counterclockwise o reduce the volume, e @ TAPE MONITOR BUTTON Rags this Key to monitor the sound from a tee deck connected ta e Tape PB jacks on the rear pane! Press it again 1o key off, snd you can listen to the seceded source.
B LISTENING TO FM BROADCASTS 1. Set fhe Input sector 1o Lunar 2. Cross the Band bisector ta select FM 3. Set the Tuning Made kay to “Aute™, 4. Press either the Up or the Down side of the Tuning key for 2 or 3 seconds, The receiver will automatically Sean the FM band in the selected direction, When a station is found, the scan will tog and the station will be chucked in automatically, Uss the Tuning key repeated (o tun your desired station. Stations may also be selected with the preset tuning keys.
Before assuming that your receiver is faulty, check fallowing the troubleshooting list which details the corrective action yau can take yourself without hav yous nearest Yamaha dealer. a to call a service engines. If you have any doubts or questions, get in touch with Clearer T AUDIO Rawer is not applied even though the Power switcher is turned on. The power cord is 1ot plugged in. Lag in the power card. There is no sound with any position of the Input selector.
