P CAUTION (PREPARED IN ACCORDANCE WITH UL STANDARD 1270} 1 Read Instructions — All the safety and operating instructions shouts be cad befog the appliance is operated.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER [OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL, & Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended o alert you o the presence of insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock 1o persons.
2 CONNECTING THE FM ANTENNA Choose an FM antenna that is appropriate to the local deception conditions, Consider the distance from the broadcast station and possible interfering objects such as surrounding tall buildings. In cases where thees is a strung signal from a local station, a parable T-type antenna is usually adequate. Connect the feeder wire to the 300 ohm terminal, stretch the wire out tight, and tern t abstain optimum reception.
€ MULTI PATH INDICATOR This indicator lights 10 remind you that the MULTI PATH switch @ is pressed. @ SIGNAL MULTILINGUALISM INDICATOR Indicates the duality of radian waves coming into the truer when broadcasts are being received, When the MULTI PATH switch s ON during reception of FM broadcasts, it also detects and indicates multi path jamming.
© PRESET STATION INDICATOR This indicator of the station selected with the PRESET STATION butter lights. € MEMORY INDICATOR his far about seconds after the MEMORY button @ is pressed, During this interval the preset memory Coca: sons may be programmed @ POWER SWITCH When postwar s turned on, Illumination lamps above the PRESET STATION button will Tight, and in a moment the station selected with INITIAL STATION SET will be tune in. Bee page B for INITIAL STATION SET.
Depending on radio wave conditions, those most suitable for FM broadcasts are selected by switch-over of the IF mode, e AUTO DX When interference of radio waves is not strong, reception is made using the wide IF range LOCAL mode.
B AUTO SEARCH Tuning 1} Press the FM/AM button 1o select Set the TUNING MODE switch to “AUTO", 3} Crass the DOWN or the UP side of the TUNING button, The tuner wail automatically scan the band and stop when & station is found. S— Eaton /) sett “Au To” | {TUNING MODE indicator will light.
B INITIAL STATION SET Feature You can have the T-1000 tuns in the station you mast often listen to automatically when power is first turned on, This feature is also useful for turning the tuner on with a timer to begin recording broadcast while away. 1] Tune the station {by AUTO, MAN'L, or PRESET} tuning that you want to listen Yo or record) when parer is trued on. 2] Press the MEMORY button and half it until its indicator begins to flash.
| TROUBLESHOOTING Before assuming that your tuner i faulty, cheek the following troubleshooting list which details corrective action you can take yourself without having to call a service engineer. I you have any doubts or questions, get in touch with your nearest Yamaha dealer. Crackling sounds from time to time {especially in weak signal areas}. ignition noise from vehicles.
