Operation Manual

108 Chapter 10—Bus Outs
01V—Owner’s Manual
About the Bus Outs
The 01V’s four bus outs can be used individually or in stereo pairs. Signals from input
channels 1 through 24 and the effects returns can be routed to bus outs 1 through 4. See
“Routing Input Channels” on page 49 for more information. The 01V does not have
dedicated bus out connections. Instead bus outs must be assigned to the Option I/O
digital outputs or omni outs.
Option I/O & the Bus Outs
Bus out signals can be assigned to the Option I/O digital outputs. See “About Option
I/O Cards” on page 216 for more information.
Omni Outs & the Bus Outs
Bus out signals can be assigned to the omni outs. See “Assigning Omni Outs” on page
116 for more information.
Monitoring Bus Outs
Bus outs can be monitored using the monitor out or phones. See “Monitor Setup” on
page 78 for more information.
Metering Bus Outs
Bus out signal levels can be metered on the HOME pages. See “Metering Signal Levels”
on page 83 for more information.
Routing Signals to the Bus Outs
Signals from input channels 1 through 24 and the effects returns can be routed to bus
outs 1 through 4. See “Routing Input Channels” on page 49 and “Routing Effects
Returns” on page 131 for more information.