Operation Manual
Table Of Contents
- PRECAUCIONES
- LEER DETENIDAMENTE ANTES DE CONTINUAR
- * Guarde este manual en un lugar seguro para su referencia futura.
- Página web de Yamaha Pro Audio global
- Contenido del paquete
- Accesorios opcionales
- Acerca de este Manual de Instrucciones
- Convenciones utilizadas en este manual
- Funciones nuevas en la versión 2 de la 01V96
- Contenido
- 1 Bienvenidos
- 2 Superficie de control y panel posterior
- 3 Principios básicos de funcionamiento
- 4 Conexiones y configuración
- 5 Guía
- 6 E/S analógica y E/S digital
- 7 Canales de entrada
- 8 Salidas Bus
- 9 Salidas Aux
- 10 Aplicar rutas de entrada y salida
- 11 Monitorizar
- 12 Surround Pan
- 13 Agrupar canales y enlazar parámetros
- 14 Efectos internos
- 15 Memorias de escena
- 16 Bibliotecas
- 17 Control remoto
- 18 MIDI
- 19 Otras funciones
- Cambiar los nombres de Input y Output Channel
- Ajustar las preferencias
- Crear una capa personalizada combinando canales (User Assignable Layer)
- Utilizar el oscilador
- Utilizar las teclas definidas por el usuario
- Utilizar Operation Lock
- Colocar las consolas en cascada
- Comprobar la batería y la versión del sistema
- Inicializar el 01V96
- Calibrar los deslizadores
- Apéndice A: Listas de parámetros
- USER DEFINED KEYS
- Asignaciones iniciales de USER DEFINED KEYS
- Parámetros de Input Patch
- Ajustes iniciales de Input Patch
- Parámetros de Output Patch
- Ajustes iniciales de Output Patch
- Ajustes iniciales definidos por el usuario de banco de la capa remota
- Parámetros de efectos
- Sincronización del tempo y de los efectos
- Parámetros EQ predefinidos
- Parámetros Gate predefinidos (fs = 44.1kHz)
- Parámetros Compressor predefinidos (fs = 44.1kHz)
- Parámetros de dinámicas
- Apéndice B: Especificaciones
- Apéndice C: MIDI
- Apéndice D: Opciones
- Índice
- MIDI Implementation Chart
- 01V96 Diagrama en bloques
- 01V96 Diagrama de livel
The above warning is located on the rear
of the unit
• Explanation of Graphical Symbols
The lightning flash with arrowhead symbol
within an equilateral triangle is intended to
alert the user to the presence of uninsulated
“dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and mainte-
nance (servicing) instructions in the literature
accompanying the product.
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instruc-
tions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
9 Do not defeat the safety purpose of the polar-
ized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A
grounding type plug has two blades and a third
grounding prong. The wide blade or the third
prong are provided for your safety. If the pro-
vided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete
outlet.
10 Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from
the apparatus.
11 Only use attachments/accessories specified by
the manufacturer.
12 Use only with the cart, stand,
tripod, bracket, or table spec-
ified by the manufacturer, or
sold with the apparatus.
When a cart is used, use cau-
tion when moving the cart/
apparatus combination to
avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service person-
nel. Servicing is required when the apparatus
has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or mois-
ture, does not operate normally, or has been
dropped.
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE.