Owner`s manual

98 Internal Effects
Digital Recording Console 02R User’s Guide
Internal Effects
Preset Effects Program Parameters
Program 1 — REVERB HALL1
This simulates the reverberation in a larger concert hall, and adds spread to sounds such as strings and brass.
Parameter Setting Range Description
Rev.Time 2.8s 0.3~30.0s Reverb time.
Hi.Ratio 0.8 0.1~1.0 High frequency decay ratio.
Diff. 6 0~10 Reverb diffusion.
Ini.Dly 40.0ms 0.1~200.0ms Initial delay between the direct sound and early reflections.
Density 3 0~3 Average time between reflections.
LPF 7.0kHz 1.0kHz~THRU Low pass filter cutoff frequency.
HPF THRU THRU~8.0kHz High pass filter cutoff frequency.
Rev.Dly 18.0ms 0.1~85.0ms Delay between early reflections and reverb.
Rev.Bal 50% 0~100% Reverb balance. The amount of reverb.
Program 2 — REVERB HALL2
This is a variation of program 1. It emphasizes longer reverberation and spaciousness.
Parameter Setting Range Description
Rev.Time 3.2s
Same as program 1 Same as program 1
Hi.Ratio 0.7
Diff. 8
Ini.Dly 38.0ms
Density 3
LPF 6.3kHz
HPF THRU
Rev.Dly 17.0ms
Rev.Bal 50%
Program 3 — REVERB ROOM1
This simulates reverberation of a room with many reflective wall aspects. It gives a live acoustic feel to drums.
Parameter Setting Range Description
Rev.Time 1.4s
Same as program 1 Same as program 1
Hi.Ratio 0.8
Diff. 7
Ini.Dly 5.0ms
Density 3
LPF THRU
HPF 280Hz
Rev.Dly 1.0ms
Rev.Bal 50%