Owner`s manual

Scene Memories 117
Digital Recording Console 02R User’s Guide
Naming a Scene Memory
To name a scene memory, you need to select the scene memory display
functions.
Display Screen
Shown below is the first SCENE display function:
You may have to press the [SCENE MEMORY] button several times to get
to this screen.
The left side of the display shows a list of the scene memories. The name of
the scene memory under the cursor is highlighted. The SCENE MEMORY
increment or decrement buttons are used to scroll through the list.
Beside the list of scene memories is the title edit field. The CURSOR buttons
are used to select the character, and the encoder wheel is used to change its
value. A table of the available characters is shown below the title edit field.
Below the character table are four control button icons. Use the CURSOR
buttons to select from the INSERT, DELETE, COPY, or PASTE icons.
At the bottom of the right side of the display is the Memory Protect check
box. When this box is checked, all scene memory is protected from the
storage operations.
1. Press the [SCENE
MEMORY] button.
A SCENE MEMORY
display function
appears. Press the
[SCENE MEMORY] button
again until the first
display function is
shown.
2. Use the CURSOR buttons
to select the title edit
box.
3. Select the individual
character positions with
the CURSOR buttons.
Rotate the encoder
wheel to select
characters for your title.
4. Press the [STORE] button.
Respond to the
confirmation popup by
selecting “EXECUTE” and
pressing the [ENTER]
button. The scene
memory is stored.
SCENE
MEMORY