Owner`s manual

164 Digital I/O, Setup, and Utilities
Digital Recording Console 02R User’s Guide
• DIO Warning OFF – With this option selected, the 02R will not report a
warning when an error is detected in the digital signals being input
from one of the digital I/O cards. When the 02R detects an error, the
message “DIGITAL I/O Error!” is flashed on the display.
If you have a poor connection to your modular digital multitrack
recorder or any other digital audio devices, this message may appear
on the screen so often that it becomes distracting. You should be aware
that if the 02R detects an error in the digital input or output, your
recorded data may be compromised. However, some modular digital
multitrack recorders will cause this error while performing
synchronization during start-up.
• MIDI Warning OFF – With this option selected, the 02R will not report
a warning when it receives a MIDI error.
The following error conditions will not be reported: “Byte Count
Error!”, “Check Sum Error!”, “Code Mismatch!”, “ID Mismatch”, and
“MIDI Ch Mismatch”.
Preferences – Factory Settings
Option / Setting Option / Setting
Auto EQ Display ON Transmit Key Remote OFF
Auto PAN Display ON Fast Meter Fall Time OFF
Auto ROUTING Display ON Pre Fader Direct Out OFF
Auto AUTOMIX Display OFF Slate Tone OFF
Auto SOLO Display OFF TC Drop Warning OFF OFF
Store Confirmation ON DIO Warning OFF OFF
Recall Confirmation OFF MIDI Warning OFF OFF
Mix Update Confirmation OFF
REC Recall Safe Fader OFF
Fader Flip Recall Safe OFF
Remote Talk Back (C3) OFF