Owner`s manual

Specifications 199
Digital Recording Console 02R User’s Guide
CH INPUT
LINE 17 through 24
–40
4kΩ 600Ω lines
–50 dB
(2.45mV)
–40 dB
(7.75mV)
–20 dB
(77.5mV)
Phone Jack
(TRS)
*3
+4
– 6 dB
(388mV)
+ 4 dB
(1.23V)
+24 dB
(12.3V)
INSERT IN MIC/LINE 1
through 8
10kΩ 600Ω lines
–10 dB
(245mV)
+ 0 dB
(775mV)
+20 dB
(7.75V)
Phone
Jack
*4
2 TRACK INPUT [ L,R ]
10kΩ 600Ω lines
+ 4 dB
(1.23V)
+ 4 dB
(1.23V)
+24 dB
(12.3V)
Phone
Jack
*5
10kΩ 600Ω lines
–10 dBV
(316mV)
–10 dBV
(316mV)
+10 dBV
(3.16V)
RCA/phono
*6
*1 Sensitivity is the lowest level that will produce an output of +4 dB (1.23V) or the nominal output level when the unit
is set to maximum gain. (All faders and level controls are maximum position.)
*2 XLR type connectors are balanced. (1=GND, 2=HOT, 3=COLD)
*3 MIC/LINE INPUT and LINE INPUT phone jacks are balanced. (Tip=HOT, Ring=COLD, Sleeve=GND)
*4 INSERT INPUT phone jacks are unbalanced. (Tip=OUT, Ring=IN, Sleeve=GND)
*5 2 TRACK INPUT phone jacks are balanced.
*6 2 TRACK INPUT RCA/phone jacks are unbalanced.
✳ In these specifications, when dB represents are specific voltage, 0 dB is referenced to 0.775 volts RMS.
✳ In these specifications, when dBV represents are specific voltage, 0 dBV is referenced to 1 volts RMS.
Input
connection
PAD GAIN
Actual
load
impedance
For use
with
nominal
Input level
Mixer
connector
Sensitivity
*1
Nominal
Max.
before clip