Owner`s manual

Secondary Recording Tutorial 63
Digital Recording Console 02R Getting Started Guide
CANCEL is the default. To cancel the STORE operation, either press the
[ENTER] button or wait about 10 seconds – the STORE operation will be
automatically cancelled.
To store your settings, use the CURSOR buttons to select the “EXECUTE”
control icon and press the [ENTER] button.
3. The scene memory is stored.
YOU SHOULD ALWAYS BE CAREFUL WHEN THE 02R DISPLAYS ITS
CONFIRMATION POPUP MESSAGE!
Naming a Scene Memory
1. Use the SCENE MEMORY increment or decrement buttons to
select the correct scene memory.
When you select a new scene memory, the number displayed in the SCENE
MEMORY LED indicator flashes.
2. Press the [SCENE MEMORY] button.
The SCENE display function appears:
To ensure the scene memory you are attempting to edit is the correct one,
you should recall it before proceeding with the next step. See “Recalling a
Scene Memory” on page 65 of the Getting Started Guide.
Note: If you decide you do not like a scene memory after you have stored it, it is
very easy to overwrite it by adjusting the mixer settings and storing them to the
same location. Conversely, it is also very easy to accidentally overwrite a valued
scene memory. The 02R has a “Memory Protect” feature to help prevent this, but
this feature can interfere with your work, plus it is very easy to turn off the
protection. See “Protecting Scene Memories” on page 118 of the User’s Guide
Note: You may have to press the [SCENE MEMORY] button several times to
get to the main screen as shown above.
SCENE
MEMORY