Owner`s manual

Configuring the 02R96 197

02R96 Version 2—Owner’s Manual

Conﬁguring the 02R96

1 Use the DISPLAY ACCESS [SETUP] button to locate the MIDI/TO HOST Setup

page, and use the DAW parameter to specify the port to which Pro Tools is

connected.

See “MIDI Port Setup” on page 191 for more information.

2 Use the DISPLAY ACCESS [REMOTE] button to locate the Remote page, and

set the target to Pro Tools.

See “Assigning a Target to the Remote Layer” on page 219 for more information.

3 Use the LAYER [REMOTE] button to select the Remote Layer.

When the Pro Tools Remote Layer is selected, the 02R96’s control surface controls Pro

To ols, not the 02R96. In order to control the 02R96, you need to select an Input Channel

Layer or the Master Layer. Audio mixing on the other Layers and Automix continues while

the Pro Tools Layer is selected.

Conﬁguring Pro Tools

Pro Tools needs to be conﬁgured as follows. For more information, see your Pro Tools doc-

umentation.

1 Launch Pro Tools.

2 If you are using MacOS 8.6 - 9.2.2, choose OMS Studio Setup from the Setups

menu, and conﬁgure OMS as necessary.

This screen shot shows the Yamaha USB MIDI driver with eight ports. An OMS-compatible

device proﬁle for the 02R96 is included on the 02R96 CD-ROM. See the included docu-

mentation for more information.

3 Choose Peripherals from the Setups menu.