Owner's Manual

106 Chapter 10—Aux Sends

02R96 Version 2—Owner’s Manual

Grouping Master Mutes (ON/OFF)

Aux Send Master Mutes can be grouped with the Mutes of other Output Channels. See

“Grouping Output Channel Mutes (ON/OFF)” on page 128 for more information.

Settings Aux Send Master Levels

Aux Send Master levels can be set as follows.

1 Press the LAYER [MASTER] button to select the Master Layer.

2 Press the FADER MODE [FADER] button to select the Fader mode.

3 Use faders 9–16 to set the Aux Send Master levels.

Refer to the legend on the right side of the faders when setting Aux Send Master

levels.

Grouping Master Faders

Aux Send Master faders can be grouped with the faders of other Output Channels. See

“Grouping Output Channel Faders” on page 126 for more information.

Delaying Aux Send Masters

Each Aux Send Master features a Delay function. See “Delaying Channel Signals” on page

120 for more information.

Soloing Aux Sends

Aux Sends can be soloed. See page 121 for more information.

Pairing Aux Sends

Aux Sends can be paired for stereo operation. See “Pairing Channels” on page 123 for more

information.

Viewing Aux Send Master Settings

Parameter and fader settings for each Aux Send Master can be viewed and set on the View

pages. See “Viewing Channel Parameter Settings” on page 129 and “Viewing Channel Fader

Settings” on page 130 for more information.

Naming Aux Send Masters

Aux Send Masters can be named for easy identiﬁcation. See “Naming Channels” on page

134 for more information.

AUX 1