Owner's Manual

134 Chapter 11—Common Channel Functions
02R96 Version 2—Owner’s Manual
Naming Channels
You can specify Long and Short names for the Input Channels, Bus Outs, Aux Sends, and
the Stereo Out as follows.
See page 250 for a list of initial Input Channel names; page 250 for Output Channel names.
Input Channels
1 Use the DISPLAY ACCESS [INPUT PATCH] button to locate the Input Channel
Name page.
2 Use the Parameter wheel, INC/DEC buttons, or the LAYER and [SEL] buttons
to select the Input Channels.
When Vertical Input Channel pairing mode is selected, Input Channels are listed in order
of vertical partners, for example, CH1, CH25, CH2, CH26, and so on.
3 Use the cursor buttons to select the Input Channel’s Long or Short name,
and then press [ENTER].
When the Title Edit window appears, edit the Input Channel name, and press OK when
you’ve finished. See “Title Edit Window” on page 46 for more information.
You can reset all Input Channel names back to their initial values by pressing the INITIAL-
IZE button.
If the Name Input Auto Copy check box in the upper right corner is checked, the first four
characters of the name entered in the LONG column are automatically copied to the
SHORT column. Also, a name entered in the SHORT column is automatically copied to the
LONG column.