Owner's Manual

202 Chapter 18—Pro Tools Remote Layer
02R96 Version 2—Owner’s Manual
Faders
The faders are used to set channel levels (see page 209), or to set send levels in Flip
mode (see page 211).
AUX SELECT Section
AUX SELECT [AUX 1]–[AUX 5] buttons are used to select sends A–E. The button indicator
of the currently selected send lights up.
ENCODER MODE Section
[PAN] (PAN) button
When this button is pressed, the Encoders work as channel panpots. Its indicator lights up
when it’s pressed. See “Panning Channels” on page 209 for more information.
[AUX] (SEND LEVEL) button
When this button is pressed, the Encoders work as send level controls. Its indicator lights
up when it’s pressed, and send A is selected automatically. If the Encoders are currently set
to control pan, its indicator lights automatically when one of the AUX SELECT
[AUX 1]–[AUX 5] (SEND A–E) buttons is pressed.
FADER MODE Section
[FADER] & [AUX] buttons
These buttons are used to select Flip mode, in which faders, Encoders, and [ON] buttons
can be used to control sends. See “Flip Mode” on page 211 for more information.
50
40
30
20
15
10
10
5
0
5
(SEND B)(SEND A) (SEND C) (SEND D)
(SEND E)
AUX 2AUX 1 AUX 3 AUX 4
AUX 5
AUX SELECT
DISPLAY
PAN SEND LEVEL
AUXPAN
ENCODER MODE
DISPLAY
AUXFADER
FADER MODE