Owner's Manual

Control Surface Operation with the Pro Tools Remote Layer 203
02R96 Version 2—Owner’s Manual
EFFECTS/PLUG-INS Section
[DISPLAY] (SHOW INSERT) button
This button is used to open and close plug-in windows.
[PLUG-INS] (DEFAULT) button
This button is used in conjunction with other controls to reset faders, panpots, and sends
to their default values. See “Resetting Faders, Sends, & Panpots” on page 214 for more infor-
mation.
[CHANNEL INSERTS]
This button determines the operation of the [SEL] buttons. When its indicator is off (Chan-
nel Select mode), [SEL] buttons select channels (see page 209). When its indicator is on
(Insert Select mode), they select inserts/plug-ins (see page 213).
[1] (ASSIGN) button
This button is used in conjunction with other controls to assign inserts/plug-ins to chan-
nels. See “Assigning Inserts/Plug-ins” on page 212 for more information.
[2] (COMPARE) button
This button is used to compare plug-in edits before and after. See “Editing Plug-ins” on page
213 for more information.
[3] (BYPASS) button
This button is used to bypass plug-ins. See “Editing Plug-ins” on page 213 and “Bypassing
Plug-ins” on page 214 for more information.
[4] (INSERT/PARAM) button
This button is used in conjunction with other controls when editing plug-ins. See “Editing
Plug-ins” on page 213 for more information.
Parameter Up ( SCROLL) & Parameter Down
(SCROLL ) buttons
These buttons are used to scroll parameters when assigning inserts and editing plug-ins. See
“A ssigning Inserts/Plug-ins” on page 212 and “Editing Plug-ins” on page 213 for more
information.
(COMPARE)(ASSIGN) (BYPASS)
(DEFAULT)
(INSERT/PARAM)
( SCROLL)
(SCROLL )
(SHOW
INSERT)
EFFECTS / PLUG INS
CHANNEL
INSERTS
PLUG INS
1234
DISPLAY