Owner's Manual

208 Chapter 18—Pro Tools Remote Layer

02R96 Version 2—Owner’s Manual

Data Entry Section

Parameter Wheel

The Parameter wheel is used for shuttling and scrubbing (see page 215). It’s also used for

making ﬁne adjustments to the selected region (see page 215).

[SHUTTLE] & [SCRUB] buttons

These buttons are used to select the Shuttle and Scrub modes. See “Scrub & Shuttle” on page

215 for more information. These buttons are mutually exclusive with the [QUICK

PUNCH] and [LOOP] buttons. Also, the cursor in the window on the computer monitor

disappears.

[ENTER] button

This button works the same as the Enter key on your computer keyboard. Pressing it opens

the New Memory Location dialog box. While a dialog box is open, pressing it performs the

same action as clicking the OK button.

[DEC] (ESC) button

For the most part, this button works the same as the Esc key on your computer keyboard.

While a dialog box is open, pressing it performs the same action as clicking the Cancel but-

ton.

[INC] (CURSOR MODE) button

This button is used to select the following cursor modes: Navigation (see page 214), Zoom

(see page 215), and Select (see page 215).

Cursor buttons

These buttons can be used to navigate the Edit window (see page 214), zoom waveforms

(see page 215), and to make ﬁne adjustments to the selected region (see page 215). Their

exact operation depends on the currently selected cursor mode.

(CURSOR MODE)(ESC)

INCDEC

ENTER

SHUTTLE

SCRUB