Owner's Manual

22 Chapter 2—Control Surface & Rear Panel
02R96 Version 2—Owner’s Manual
ENCODER MODE
A
ENCODER MODE DISPLAY button
This button is used to select the Encoder Mode Assign page. See “Selecting Encoder Modes”
on page 50 for more information.
B PAN button
This button is used to select the Pan Encoder mode. Its indicator lights up when this mode
is selected. In this mode, the Encoders function as Pan controls while an Input Channel
Layer is selected. While the Master Layer is selected, Encoders 1–8 function as Input Chan-
nel 49–56 Pan controls, and Encoders 9–24 are inactive. See “Selecting Encoder Modes” on
page 50 for more information.
C AUX button
This button is used to select the Aux Encoder mode. Its indicator lights up when this mode
is selected. In this mode, the Encoders function as Aux Send level controls when an Input
Channel Layer is selected. While the Master Layer is selected, Encoders 1–8 function as
Input Channel 49–56 Aux Send controls, and Encoders 9–24 are inactive. See “Selecting
Encoder Modes” on page 50.
D ASSIGN 1 & 2 buttons
These buttons are used to select the assignable Encoder modes. The button indicator for the
currently selected mode lights up. When an assignable mode is selected, the function of the
Encoders depends on the assigned parameter. Up to two parameters, from a list of over 40,
can be assigned to these two buttons. See “Assigning Parameters to the ENCODER MODE
Assign Buttons” on page 51 for more information.
FADER MODE
A
FADER button
This button selects Fader mode, in which the faders control Input or Output Channel levels,
depending on the currently selected Layer. Its indicator lights up when this mode is selected.
See “Selecting Fader Modes” on page 49 for more information.
B AUX button
This button selects the Aux Fader mode, in which the faders control Aux Send levels. Its
indicator lights up when this mode is selected. See “Selecting Fader Modes” on page 49 for
more information.
4
AUXPAN
ASSIGN 2ASSIGN 1
ENCODER MODE
DISPLAY
23
1
1 2
AUXFADER
FADER MODE