Owner's Manual

94 Chapter 8—Stereo Out
02R96 Version 2—Owner’s Manual
Balancing the Stereo Out
The left and right channels of the Stereo Out can be balanced as follows.
1 Press the STEREO [SEL] button to select the Stereo Out.
2 Use the Pan control to set the balance.
The pan display indicates the balance. When the balance is set to center, the center two seg-
ments light up.
The Stereo Out balance can also be set on the Stereo Fader View page. See “Viewing Channel
Fader Settings” on page 130 for more information.
Delaying the Stereo Out
The left and right channels of the Stereo Out can be delayed independently by using the Ste-
reo Out Delay. See “Delaying Channel Signals” on page 120 for more information.
Viewing Stereo Out Settings
Parameter and fader settings for the Stereo Out can be viewed and set on the View pages.
See “Viewing Channel Parameter Settings” on page 129 and “Viewing Channel Fader Set-
tings” on page 130 for more information.
Naming the Stereo Out
The Stereo Out can be named for easy identification. See “Naming Channels” on page 134
for more information.
L
EVEN
R
LR
PAN/SURROUND
DISPLAY
ODD