User Manual

279
02R96 Версия 2 — Руководство Пользователя
LOW GAIN –96.0 to +12.0 dB Low band level
MID GAIN –96.0 to +12.0 dB Mid band level
HI. GAIN –96.0 to +12.0 dB High band level
PRESENCE –10 to +10
For positive values, the threshold of the high band is lowered and
the threshold of the low band is increased. For negative values, the
opposite will occur. When set to 0, all three bands are affected the
same.
CMP. THRE –24.0 dB to 0.0 dB Compressor threshold
CMP. RAT 1:1 to 20:1 Compressor ratio
CMP. ATK 0–120 ms Compressor attack
CMP. REL
1
Compressor release time
CMP. KNEE 0–5 Compressor knee
LOOKUP 0.0–100.0 ms Lookup delay
CMP. BYP ON/OFF Compressor bypass
L–M XOVR 21.2 Hz–8.00 kHz Low/mid crossover frequency
M–H XOVR 21.2 Hz–8.00 kHz Mid/high crossover frequency
SLOPE –6 dB, –12 dB Filter slope
CEILING –6.0 dB to 0.0 dB, OFF Specifies the maximum output level
EXP. THRE –54.0 dB to –24.0 dB Expander threshold
EXP. RAT 1:1 to ∞:1 Expander ratio
EXP. REL
1
Expander release time
EXP. BYP ON/OFF Expander bypass
LIM. THRE –12.0 dB to 0.0 dB Limiter threshold
LIM. ATK 0–120 ms Limiter attack
LIM. REL
1
Limiter release time
LIM. BYP ON/OFF Limiter bypass
LIM. KNEE 0–5 Limiter knee
Параметры эффектов
Динамический процессор с измерением каналов (M. BAND DYNA.)
Два входа, два выхода 3-полосного динамического процессора с индивидуальным измерением
уровня соло и сокращения для каждого диапазона.
1. 6 мс–46.0 с (fs=44,1 кГЦ), 5 мс–42,3 с (fs=48 кГц), 3 мс–23.0 с (fs=88,2 кГЦ), 3 мс–21,1 с (fs=96 кГц).
Параметр Диапазон значений Описание