User Manual

5
Part Names and Functions
The Dual Phaser consists of two low frequency oscillators (LFOs) and two phasers.
The Phase A LFO is fixed as LFO 1, but either LFO 1 or LFO 2 can be selected as the Phaser B LFO. You can also select normal
or reverse for the phase.
You can also rearrange the way the two phasers are connected.
1 LFO 1 RATE
Adjusts the rate for LFO 1.
2 LFO 1 SHAPE
Changes the waveform for LFO 1.
3 PHASER A DEPTH
Adjusts the depth of modulation for Phaser A.
4 PHASER A FEEDBACK
Adjusts the amount of feedback for Phaser A.
5 PHASER A ON/OFF
Turns Phaser A ON or OFF.
6 LFO 2 RATE
Adjusts the rate for LFO 2.
7 LFO 2 SHAPE
Changes the waveform for LFO 2.
8 PHASER B DEPTH
Adjusts the depth of modulation for Phaser B.
9 PHASER B FEEDBACK
Adjusts the amount of feedback for Phaser B.
) PHASER B ON/OFF
Turns Phaser B ON or OFF.
! SWEEP LFO 1/LFO 2
Selects the LFO for Phaser B.
@ SWEEP NORM/REV
Selects the LFO phase for Phaser B.
Selecting NORM sets normal phase. Selecting REV sets
reverse phase.
# MODE
Rearranges the way the two phasers are connected.
I: The stereo input is mixed. Then the Phaser A effect is
applied to the sound that is output from left channel.
Phaser B applied to the sound that is output from the
right channel.
II: The stereo input is mixed. Phaser A is applied to the
sound that is output from the left channel. Phaser A and
then Phaser B is applied to the sound being output from
the right channel.
III: The stereo input is mixed. Phaser A and then Phaser
B are applied to the sound, which is then output from
both the left and right channels.
IV: Phaser A is applied to the input on the left channel,
which is then output from the left channel. Phaser B is
applied to the input on the right channel, which is then
output from the right channel.
$ MIX BALANCE
Sets the balance between the direct sound and the effect
sound.
Although this parameter is shared by the various effects
in the console, a setting of 100 percent is recommended
when using Dual Phaser.
1
6
1
3
8
!
2
4
9
@
67
5
)
#
2
7 ! @8 9 ) #
3 4 5
$
Studio Manager Dual Phaser window
Console display
I
L+R A L
BR
III
LAL
RBR
II
L+R A L
BR
IV
L+R A B L
R