User Manual

9
DIV R Display
Sets the DIV R value.
You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the
mouse.
If the setting is zero, only L/R is used. If 50 is set, the ratio between L/R and the center will be 50:50. When 100 is set, the
signal will go to the center channel only.
[LINK] Button/[F/R LINK] Knob
Links DIV R to the DIV F value.
When the two are linked, the DIV R value will be the same as the DIV F.
This is displayed in the Room ER window only when Surround Mode is 6.1 . Otherwise it will be grayed out.
9 CURRENT TIME Display
Displays the Timecode. This cannot be edited.
If it is in offline mode or the Clock Reference setting is MIDI CLOCK, 00:00:00.00 will always be displayed.
) AUTOMATION
Settings related to Automation.
AUTOMATION Button/[AUTO] Knob
SRC: Moves the sound source along a path.
LIS: Moves the listener along a path.
OFF: Turns OFF Automation. No path is displayed.
START KEY
Left/Right Position Display
Positions the START KEY in the Left/Right direction.
You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the mouse.
Front/Rear Position Display
Positions the START KEY in the Front/Rear direction.
You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the mouse.
Orientation Display/[INI.DIR] Knob
Orientation at the start.
You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the mouse.
[S] Button
Sets the displayed Current Time as the Timecode for the START KEY.
This button is disabled if it is in offline mode or the Clock Reference setting is MIDI CLOCK.
START TIME CODE
The Timecode for the START KEY.
You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the mouse.