User Manual

6
[Low Freq]/[LO.FREQ.]
Frequency value that serves as the basis for the Lo Ratio value. The frequency band below this value is
affected by the Lo Ratio parameter setting.
In Studio Manager, drag the icon to change the value.
n The range is from 22.0Hz through 18.0kHz.
Filter Frequency Response Curve
The curve changes depending on the HPF and LPF values.
Reverberation images
These images represent the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverberation.
These images change shape depending on the parameter values. The vertical axis represents the level; the
horizontal axis represents reverb time; the shape represents the envelope.
Reverb time curve
This curve represents the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverb time.
The curve changes depending on the Reverb Time, Hi Ratio, and Lo Ratio parameter values.
3 4 ) !
7 6 5 @
8 9
2
3
4
5
6
7
8
9
)
!
@
@
Studio Manager Console
7
8
#
$
%
$
$
)
!
@
#
Studio Manager
$
Studio Manager
%
Studio Manager