User Manual

ManualsBrandsYamaha ManualsDigital MixersYamaha 02R96VCM

02R96 V2.2 Supplementary Manual

The 02R96 System Software Version 2.20 features the following changes and additions (including the changes made

up to Version 2.11).

Changes and additions in Version 2.20

❏

More Add-On Effects Packages available (pages 155 and 158)

The following Add-On Effects Packages are now available:

•

AE041

Surround Post Package

•

AE051

Vintage Stomp Package

Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects pro-

grams. These preset programs are dedicated to Add-On Effects. The numbers of effects programs that do not have

Add-On Effects installed are grayed out and cannot be used. The following effects programs in the Effects library

have been dedicated to the new Add-On Effects Packages.

Please refer to the following Yamaha website for the latest information on the Add-On Effects Packages:

http://www.yamahaproaudio.com

❏

Additional trigger sources in the GPI OUTPUT section (pages 225 and 254)

The following parameters have been added as the trigger signal source in the GPI OUTPUT section.

xxx ON TALLY:

The trigger signal is active only while the corresponding channel is turned ON.

The following parameters have been added in the OUTPUT list of the “GPI Trigger Source & Target List” on

page

254.

❏

About the 02R96 Editor version

If you use the 02R96 Editor (Studio Manager) to control the 02R96, update the 02R96 Editor to version 2.1.2 or

higher (Studio Manager version 2.1 or higher).

If your Studio Manager CD-ROM version is not X5401

, download the latest version from the following Yamaha

website:

http://www.yamahaproaudio.com

No. Preset name Type

62 Room ER ROOM ER

63 Auto Doppler AUTO DOPPLER

64 Field Rotation FLD ROTATION

65 Max100 MAX100

66 Vintage Phaser VNTG PHASER

67 Dual Phaser DUAL PHASER

# Source

254 CH1 ON TALLY

309 CH56 ON TALLY

310 BUS1 ON TALLY

317 BUS8 ON TALLY

318 AUX1 ON TALLY

325 AUX8 ON TALLY

326 ST ON TALLY

Summary of content (8 pages)

PAGE 1
02R96 V2.2 Supplementary Manual The 02R96 System Software Version 2.20 features the following changes and additions (including the changes made up to Version 2.11). Changes and additions in Version 2.20 ❏ More Add-On Effects Packages available (pages 155 and 158) The following Add-On Effects Packages are now available: • AE041 Surround Post Package • AE051 Vintage Stomp Package Due to this addition, effect memories #53 through 67 in the Effects library are now designated as preset effects programs.
PAGE 2
Changes in V2.11 ❏ Y96K card and MY16-mLAN card support (pages 59 and 299) The Waves Y96K Plug-in DSP card (supported by Version 2.10) and the MY16-mLAN interface card are now supported. Also, in accordance with the mLAN MIDI specifications, multiple MIDI ports on SLOT 1 have been changed to a single port. (Now you do not need to select Ports 1-8.
PAGE 3
❏ THX presets added to Surround Monitor (page 139-141) Presets for the THX pm3 monitor system have been added to the bass management settings for surround monitoring. Several supplements have also been added regarding the surround monitor settings, so please replace the corresponding pages with the following. Configuring Surround Monitoring Surround monitoring, including speaker setup, monitor matrix, Bass Management, and monitor alignment, is configured on the Surround Monitor Setup page.
PAGE 4
The following screen shows an example in 6.1 Surround mode and 3-1 Monitor Matrix mode. • BASS MANAGEMENT You can set the filter and attenuator settings for each Surround Monitor Channel using eight preset Bass Management modes. The following presets are available: No.
PAGE 5
About the Presets (1) DVD LFE80Hz This is a preset optimized for DVD-Video production. The LFE playback bandwidth is set up to 80 Hz. When using this preset, we recommend that you use an external device to apply an LPF (fc=80 Hz, –24 dB/oct) to the LFE master source. To monitor audio on DVD-Audio or SACD discs, change the LFE level (AMP) and LPF (LPF1) to 0 dB and THRU, respectively, if necessary. The LFE output gain on some DVD players and decoders may already be set to +10 dB.
PAGE 6
[THXM] THX Music This preset is configured for DVD-Music production. Use this preset when mixing and/or monitoring multi-channel music content (including DVD-Audio and SACD). Only one parameter can be changed. The LFE gain (AMP) can be set to +10dB (default) or 0dB. Select the level that complies with the standards of the target media. Please note: The LFE output gain on some DVD players, receivers, and/or decoders may already be set to +10dB.
PAGE 7
Memo
PAGE 8
U.R.G.