Operation Manual

Metering Aux Send Masters 105
02R96 Version 2—Owner’s Manual
3 To execute the Copy operation, move the cursor to the [YES] button, then
press [ENTER].
To cancel the Copy operation, move the cursor to the [NO] button, then press [ENTER].
Metering Aux Send Masters
Aux Send Master levels can be metered on the Meter pages. See “Metering” on page 107 for
more information.
Monitoring Aux Send Masters
Aux Send Masters can be assigned to the CONTROL ROOM [ASSIGN 1] or [ASSIGN 2]
button for monitoring. See “Control Room Monitoring” on page 136 for more informa-
tion. Aux 7 and Aux 8 can be monitored via the STUDIO MONITOR OUT (see page 137).
Attenuating Aux Send Masters
Aux Send Master signals can be attenuated pre-EQ. See “Attenuating Signals” on page 110
for more information.
EQ’ing Aux Send Masters
Each Aux Send Master features 4-band parametric EQ. See “Using EQ” on page 111 for
more information.
Grouping Master EQs
Aux Send Master EQs can be grouped with the EQs of other Output Channels. See “Group-
ing Output Channel EQs” on page 114 for more information.
Aux Send Master Inserts
Internal effects processors and external signal processors can be patched into the Aux Send
Masters by using the Inserts. See “Using Inserts” on page 115 for more information.
Compressing Aux Send Masters
Signal dynamics can be controlled by using the Aux Send Master Compressors. See “Com-
pressing Channels” on page 116 for more information.
Grouping Master Compressors
Aux Send Master Compressors can be grouped with the Compressors of other Output
Channels. See “Grouping Output Channel Compressors” on page 119 for more informa-
tion.
Muting Aux Send Masters (ON/OFF)
Aux Send Masters can be muted as follows.
1 Press the LAYER [MASTER] button to select the Master Layer.
2 Use channel strip [ON] buttons 9–16 to mute the Aux Send Masters.
The [ON] button indicators of Aux Send Masters that are on light up.
Tip: If the copy destination Input Channel has been paired with a vertical partner in another
Layer, the fader position will be copied to the partner’s Aux Send.
ON