Operation Manual

182 Chapter 16—Automix
02R96 Version 2—Owner’s Manual
Parameter Recording
The following table summarizes parameter recording operation for each parameter. Param-
eter adjustments made on the respective display pages are also recorded.
Parameter Channel
OVER-
WRITE
Operation Pair/Group
Channel Levels
(faders)
Input
FADER
Set Layer to input, Fader mode to
Fader, use faders
Faders of paired channels and
grouped faders are recorded
together
Bus Out, Aux Send
Set Layer to Master, Fader mode to
Fader, use faders
Stereo Out Use Stereo Out fader
Group Master lev-
els
Use faders assigned to Group Master
in the User Assignable Layer.
Channel Mutes
(ON/OFF)
Input
ON
Set Layer to input, use [ON] buttons
[ON] buttons of paired chan-
nels and grouped mutes are
recorded together
Bus Out, Aux Send Set Layer to Master, use [ON] buttons
Stereo Out Use Stereo Out [ON] button
Group Master
On/Off
Use [ON] buttons assigned to Group
Master in the User Assignable Layer.
Pan
Input PAN
Set Layer to input, Encoder mode to
Pan, use Encoders.
If Pan mode is Gang or
Inverse-Gang, paired chan-
nels are recorded together.
Surround Pan
Input SURR
Use Joystick (If a surround parameter
is assigned to the Encoders, also use
Encoders)
If ST LINK button on Surround
Edit page is on, adjacent
channels are recorded
together.
EQ (F, Q, G, On/Off)
Input, Bus Out,
Aux Send, Stereo
Out
EQ
Use SELECTED CHANNEL EQUALIZER
section (If EQ parameter assigned to
an Encoder, also use Encoders)
EQ of paired channels, and
grouped EQs recorded
together
Aux send 1–8 levels
Input AUX
If Fader mode is Aux, use faders. If
Encoder mode is Aux, use Encoders
(also use Aux Send or Aux view
pages)
Aux send levels of paired
channels recorded together.
(If the selected Aux Send is
paired, the send level to both
Aux Sends is recorded.)
Aux send 1–8 mutes
Input
AUX
ON
Use Aux Send or Aux view pages
Aux send mutes of paired
channels recorded together
(If the selected Aux Send is
paired, mutes for both Aux
Sends recorded.)
Scene recalls
——
Use SCENE MEMORY section or
Scene Memory page
—
Library recalls
EQ, Gate, Comp,
Effects, Channel
— Use corresponding library page —
Effect parameters
(certain parameters)
Effects processors
1–4
—
Use Parameter controls 1–4 (push to
punch in/out). Select the desired
parameter on the Effect Edit page,
then press [ENTER]
—
User Defined Plug-Ins
(parameters 1–4)
Plug-Ins 1–4 —
Use Parameter controls 1–4 (push to
punch in/out). Select the desired
parameter on the Plug-in Edit page,
then press [ENTER]
—
User Defined Remote
Layers
Faders FADER
Select User Defined Remote Layer,
use faders
—
[ON] buttons ON
Select User Defined Remote Layer,
use [ON] buttons
—
Encoders PAN
Select User Defined Remote Layer,
use Encoder
—