Operation Manual

230 Chapter 20—Other Functions
02R96 Version 2—Owner’s Manual
You can initialize the assignments of the currently selected bank by selecting the INITIAL-
IZE button, and pressing [ENTER].
User Defined Keys banks can be stored to an external MIDI device, such as a MIDI data filer,
by using MIDI Bulk Dump (see page 195).
Setting Preferences
You can customize the operation of the 02R96 by using the preferences pages.
Preferences 1
1 Use the DISPLAY ACCESS [SETUP] button to locate the Preferences 1 page.
2 Use the cursor buttons or Parameter wheel to select the preferences, and
use the INC/DEC buttons or [ENTER] button to set them.
Auto ROUTING Display: When this preference is on, the Routing pages appear auto-
matically when a button in the SELECTED CHANNEL ROUTING section is pressed (see
page 82).
Auto DYNAMICS Display: When this preference is on, the Gate Edit page appears auto-
matically when a gate control in the SELECTED CHANNEL DYNAMICS section is oper-
ated (see page 74), and the Comp Edit page appears automatically when a Compressor
control in the SELECTED CHANNEL DYNAMICS section is operated (see page 116).
Auto PAN/SURROUND Display: When this preference is on and Input Channels have
been selected, the Pan pages appears automatically when a control in the SELECTED
CHANNEL PAN/SURROUND section is operated (see page 84). Similarly, when a Sur-
round Pan mode other than Stereo is selected, the Input Channel Surround Edit page
appears automatically when the Joystick is operated (see page 88). Also, when Stereo is
selected, the Fader View page appears automatically when the Pan controls are operated.
Auto EQUALIZER Display: When this preference is on, the EQ Edit page appears auto-
matically when a control in the SELECTED CHANNEL EQUALIZER section is operated
(see page 113).
Auto SOLO Display: When this option is on, the Solo Setup page appears automatically
when an channel is soloed (see page 121).
Auto WORD CLOCK Display: When this preference is on, the Word Clock Select page
appears automatically if the currently selected external wordclock source fails (see page 56).
Auto Channel Select: When this preference is on, channels can be selected by moving
the corresponding fader or Encoder, or by turning on the corresponding [AUTO], [SOLO],
or [ON] button.
Store Confirmation: When this preference is on, the Title Edit window appears when
you store a Scene (page 164) or library memory (page 143).