Operation Manual

24 Chapter 2—Control Surface & Rear Panel
02R96 Version 2—Owner’s Manual
K INPUT PATCH button
This button is used to select the following pages: Input Channel Patch, Input Channel Insert
In Patch, Effect Input/Output Patch, Input Channel Name, and Input Patch Library. See
“Input Patching” on page 66 for more information.
L OUTPUT PATCH button
This button is used to select the following pages: Slot Output Patch, Omni Out Patch, Out-
put Insert In Patch, Input Channel Direct Out Destination, 2TR Out Digital Patch, Output
Channel Name, and Output Patch Library. See “Output Patching” on page 68 for more
information.
EFFECTS/PLUG-INS
A
EFFECTS/PLUG-INS DISPLAY button
This button is used to select the following pages: Effects Edit, Effects Library, Plug-In Setup,
and Plug-In Edit. See “Internal Effects & Plug-Ins” on page 153 for more information.
B INTERNAL EFFECTS button
This button is used to select the internal effects processors in conjunction with the
EFFECTS/PLUG-INS [1–4] buttons. Its indicator lights up when it’s pressed. See “Editing
Effects” on page 156 for more information.
C PLUG-INS button
This button is used to select the Plug-Ins in conjunction with the EFFECTS/PLUG-INS
[1–4] buttons. Its indicator lights up when it’s pressed. See “Editing Plug-Ins” on page 160
for more information.
D CHANNEL INSERTS button
If an internal effects processor or Y56K card effect is inserted in the currently selected chan-
nel, the relevant Effects Edit or Plug-In Edit page appears when this button is pressed, and
its indicator lights up. In addition, the corresponding EFFECTS/PLUG-INS [1–4] button
indicator flashes. If it’s a Y56K that is inserted, the [PLUG-INS] button indicator also
flashes. If it’s an internal effects processor, the [INTERNAL EFFECTS] button indicator
flashes. A warning message appears if there’s nothing inserted in the currently selected
channel. See “Editing Effects” on page 156 and “Editing Plug-Ins” on page 160 for more
information.
E EFFECTS/PLUG-INS 1–4 buttons
These buttons are used to select the internal effects processors and Plug-Ins in conjunction
with the EFFECTS/PLUG-INS [INTERNAL EFFECTS] and [PLUG-INS] buttons. The but-
ton indicator of the currently selected internal effects processor or Plug-In lights up. While
the EFFECTS/PLUG-INS [CHANNEL INSERTS] button indicator is lit, all of these buttons
are inactive.
F Parameter Up/Down buttons
These buttons are used to select the rows of internal effects processor and Plug-In parame-
ters for editing with Parameter controls 1–4. The parameters in the currently selected row
appear highlighted. Up to 16 parameters can be displayed at a time. If more are available,
an up or down arrow is displayed. See “Editing Effects” on page 156 and “Editing Plug-Ins”
on page 160 for more information.
1
6
EFFECTS / PLUG INS
INTERNAL
EFFECTS
CHANNEL
INSERTS
PLUG INS
1234
DISPLAY
2 3 4
5
7