Operation Manual

Stereo Out Inserts 93

02R96 Version 2—Owner’s Manual

Stereo Out Inserts

Internal effects processors and external signal processors can be patched into the Stereo Out

by using the Inserts. See “Using Inserts” on page 115 for more information.

Compressing the Stereo Out

Signal dynamics can be controlled by using the Stereo Out Compressor. See “Compressing

Channels” on page 116 for more information.

Grouping Master Compressors

The Stereo Out Compressor can be grouped with the Compressors of other Output Chan-

nels. See “Grouping Output Channel Compressors” on page 119 for more information.

Muting the Stereo Out (ON/OFF)

The Stereo Out can be muted by using the STEREO [ON] button, which is used

exclusively for this task and is not affected by the Layers. Its indicator lights up

when the Stereo Out is on.

Grouping Master Mutes (ON/OFF)

The Stereo Out Mute can be grouped with the Mutes of other Output Channels. See

“Grouping Output Channel Mutes (ON/OFF)” on page 128 for more information.

Setting the Stereo Out Level

The Stereo Out level is set by using the STEREO fader, which is used exclu-

sively for this task and is not affected by the Layers or Fader modes.

Grouping Master Faders

The Stereo Out fader can be grouped with the faders of other Output Channels. See

“Grouping Output Channel Faders” on page 126 for more information.

STEREO