User Manual

Format Details 331
02R96 第 2 版 — 使用说明书
*1) 0:CH1 - 55:CH56, 128:BUS1 - 135:BUS8, 256:AUX1 -
263:AUX8, 512:STEREO L - 513:STEREO R
Use 256 if the recall destination or store source is a single data
item.
Effect is 0:Effect1 - 3:Effect4
If the store destination is 16383 (0x3FFF), this indicates that the
library data has been changed by a external cause (such as bulk
reception) (only transmitted by the 02R96)
*2) This is also transmitted when a program that is not assigned in
the [Program Change Table] is recalled. (Normally, it is trans-
mitted by Program Change messages.)
*3) Varies with the firmware version.
13.4.15 Parameter change (Function call: title)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the title of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted
on the [Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
* Varies with the firmware version.
13.4.16 Parameter request (Function call: title)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, a Parameter Change message will be transmitted on
the [Rx CH].
Refer to the above table for the Functions and Numbers.
13.4.17 Parameter change
(Function call: scene/library clear)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, the specified memory/library will be cleared.
Transmission
If [Parameter change ECHO] is ON, this message will be retransmitted
without change.
* Varies with the firmware version.
13.4.18 Parameter change (Function call: pair)
Reception
If [Parameter change RX] is ON and the [Rx CH] matches the Device
Number included in the SUB STATUS, these messages are received. If [Pa-
rameter change ECHO] is ON, these messages are echoed.
When this is received, pairing will be enabled/disabled for the specified
channel. (Otherwise, these messages are reserved for future use.)
*1) 0:CH1 - 95:CH96, 128:BUS1 - 135:BUS8, 256:AUX1 -
267:AUX12
• In the case of PAIR, you must specify channels for which pairing
is possible.
• In the case of PAIR ON with COPY, you must specify Source
OUTPATCH LIB STORE 0x28 1-32 256, 16383 rx/tx
Bus to Stereo LIB STORE 0x29 1-32 256, 16383 rx/tx
Surround Monitor LIB STORE 0x2A 1-32 256, 16383 rx/tx
AUTOMIX LIB STORE 0x2B 1-16 256, 16383 rx/tx
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
ADDRESS 00010000 10
Function call
0100ffff 4f
title
0mmmmmmm mh
number High
0mmmmmmm ml
number Low
DATA 0ddddddd dd
title 1
:
:
:
0ddddddd dd
title x (depend on the library)
EOX 11110111 F7
End of exclusive
function number size
SCENE LIB TITLE 0x40 0-99,256 (0:response only) 16
EQ LIB TITLE 0x41 1-200 (1-40:response only) 16
GATE LIB TITLE 0x42 1-128 (1-4:response only) 16
COMP LIB TITLE 0x43 1-128 (1-36:response only) 16
EFF LIB TITLE 0x44 1-128 (1-xx(*):response only) 16
CHANNEL LIB TITLE 0x46 0-128 (0-1:response only) 16
INPATCH LIB TITLE 0x47 0-32 (0:response only) 16
OUTPATCH LIB TITLE 0x48 0-32 (0:response only) 16
Bus to Stereo LIB TITLE 0x49 0-32 (0:response only) 16
Surround Monitor LIB TITLE 0x4A 0-32 (0:response only) 16
AUTOMIX LIB TITLE 0x4B 1-16 16
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0011nnnn 3n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
function number channel*1) rx/tx
ADDRESS 00010000 10
Function call
0100ffff 4f
TITLE 0mmmmmmm mh
number High
0mmmmmmm ml
number Low
EOX 11110111 F7
End of exclusive
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
ADDRESS 00010000 10
Function call
0110ffff 6f
clear function
0mmmmmmm mh
number High
0mmmmmmm ml
number Low
EOX 11110111 F7
End of exclusive
function number
SCENE LIB CLEAR 0x60 1-99
EQ LIB CLEAR 0x61 41-200
GATE LIB CLEAR 0x62 5-128
COMP LIB CLEAR 0x63 37-128
EFF LIB CLEAR 0x64 xx(*)-128
CHANNEL LIB CLEAR 0x66 2-128
INPATCH LIB CLEAR 0x67 1-32
OUTPATCH LIB CLEAR 0x68 1-32
Bus to Stereo LIB CLEAR 0x69 1-32
Surround Monitor LIB CLEAR 0x6A 1-32
AUTOMIX LIB CLEAR 0x6B 1-16
STATUS 11110000 F0
System exclusive message
ID No. 01000011 43
Manufacture's ID number (YAMAHA)
SUB STATUS 0001nnnn 1n
n=0-15 (Device number=MIDI Channel)
GROUP ID 00111110 3E
MODEL ID (digital mixer)
MODEL ID 01111111 7F
Universal
ADDRESS 00010001 11
Function call Pair
0000ffff 0f
function
0sssssss sh
Source channel H
0sssssss sl
Source channel L
DATA 0ddddddd dh
Destination channel H
0ddddddd dl
Destination channel L
EOX 11110111 F7
End of exclusive
function channel
PAIR ON with COPY 0x00 *1)
PAIR ON with RESET BOTH 0x01 *1)
PAIR OFF 0x02 *1)