User Manual

YVC-1000 User's Manual

Change the setting depending on the device connected

to the audio input terminals.

■ When the video conference system is

connected:

The factory settings are compatible with the connection

of the video conference system; therefore, you do not

need to change them. Reconfigure the settings when

connecting the video conference system in place of

external microphones.

1 In the "YVC-1000 Configurator"

window, select the "AUDIO IN" tab.

2 Select "CONFERENCE SYSTEM"

from the "MODE" drop-down list.

Select this item for the terminal (either or both of the

L and R terminals) connected to the video

conference system.

■ When external microphones are

connected:

1 In the "YVC-1000 Configurator"

window, select the "AUDIO IN" tab.

2 Select "PA MICROPHONE" from the

"MODE" drop-down list.

Select this item for the terminal (either or both of the

L and R terminals) connected to the external

microphones.

After completing the setting, conduct a test to

identify whether there are any problems in relation

to the audio sound of the external microphones.

If "PA MICROPHONE" is selected, the latency

compensation of external speakers, which has been set

by the automatic audio tuning function, will not be

enabled.

Changing the setting of the

audio input terminals

Audio input terminals

Select

Note

Select