User Manual

YVC-1000 User's Manual

Change the setting depending on the device connected

to the audio output terminals.

■ Adjusting the audio output volume

The sound may crack or become faint in the remote

location depending on your environment. In this case,

adjust the audio output volume.

1 In the "YVC-1000 Configurator"

window, select the "AUDIO OUT" tab.

2 Select the volume from the "OUTPUT

VOLUME" drop-down list.

The volume can be set in 3 dB steps between -12 dB

(minimum) and +12 dB (maximum).

Change the setting depending on the device connected

to the USB port.

If the firmware version of the product is below 2.03, you

cannot change the setting of the USB port.

■ Setting the data transfer rate of the

USB port

1 In the "YVC-1000 Configurator"

window, select the "USB" tab.

2 Select the data transfer rate.

Changing the setting of the

audio output terminals

Audio output terminals

Select

Changing the setting of the

USB port

Note

Setting Description

HI-SPEED Transfers data in USB 2.0 High

Speed mode.

FULL-SPEED Transfers data in USB 2.0 Full

Speed mode.

USB port

Select