User Manual
YVC-1000 User's Manual
6
■ Indicator status for each button
The status of the product is indicated by the indicator color and the light up/flash mode for each button.
Button type Button status Status of the product
Power button ( )
(page 5: 1)
Not lit Power-off (the power cable is not plugged into the
outlet)
Lit (Red) Standby (→ page 11: Step 3)
Lit (Green) Power-on (→ page 12)
Lit (Orange) Firmware error (→ page 41: Q1)
Flash (Orange) Firmware being updated
Flash (Red) Hardware error (→ page 41: Q1)
Volume + and - buttons
()
(page 5: 2)
Not lit Operation disabled
Lit (Green) Speaker volume adjustable (→ page 32)
Flash (Green) Speaker selectable (→ page 31)
Speaker muted (→ page 32)
Tuning fork button ( )
(page 5: 4)
Not lit Operation disabled
Lit (Green) Acoustic conditions good (→ page 28: Step 4)
Lit (Orange) Acoustic conditions bad
Flash (Orange) Automatic audio tuning being performed
(→ page 28: Step 1)
High-speed flash (Orange) Automatic audio tuning has been ended abnormally
(→ page 28: Step 4)
Acoustic conditions bad (in normal mode)
Bluetooth button ( )
(page 5: 5)
Not lit Operation disabled
Lit (Green) Bluetooth unconnected (→ page 22)
Flash (Blue) Bluetooth connectable (→ page 21: Step 2)
High-speed flash (Blue) Bluetooth pairing enabled (→ page 20: Step 3)
Lit (Blue) Bluetooth connected