YVC-1000MS User Manual

YVC-1000MS User's Manual

■ Pairing and Bluetooth connection using the NFC function

(for NFC-compatible model)

If the smartphone satisfies the following conditions (hereinafter, referred to as an "NFC-compatible model"), pairing

and Bluetooth connection operations can be performed easily.

• NFC-compatible Android devices

Before starting this procedure, turn the NFC function on in the smartphone.

This function may not work or the connectable distance may be different depending on smartphones.

• If the smartphone is covered with a case, remove the case.

• If pairing or Bluetooth connection has failed, change the position of where to pass the smartphone over the product.

1 Press the power button ( ) to turn

the product on.

When the power is turned on, all the buttons light up

green.

2 Press the Bluetooth button ( ).

The Bluetooth button ( ) flashes blue, and the

Bluetooth connection is enabled.

3 Pass the smartphone over the NFC

logo of the product.

When the connection is completed, the button lights

up blue.

Also, the voice guidance notifies the user that a

Bluetooth connection has succeeded.

If the Bluetooth button ( ) is pressed while the Bluetooth

button ( ) is flashing blue or if 90 seconds has elapsed

while a Bluetooth connection remains uncompleted, the

Bluetooth enable status is canceled.

■ Terminating a Bluetooth connection

If one of the following operations is performed while a Bluetooth connection is made, a Bluetooth connection is

terminated.

• Press the Bluetooth button ( ).

• Perform the Bluetooth disconnection procedure on the smartphone.

• Pass the smartphone over the NFC logo of the product (for an NFC-compatible model).

When a Bluetooth connection is terminated, the Bluetooth button ( ) lights up green.

Also, the voice guidance notifies the user that a Bluetooth connection has been terminated.

When the product is placed into the standby mode, a Bluetooth connection is also terminated.

Note

NFC logo