YVC-1000MS User Manual

YVC-1000MS User's Manual
39
3 Change the volume or tone setting to
suit the type of external microphones
you are using, or your environment.
Change the setting in the drop-down list.
SIGNAL LEVEL:
Set the output level of the external microphones.
GAIN:
Adjust the sensitivity of the external microphones.
The sensitivity can be set in 3 dB steps between -12
dB (minimum) and +12 dB (maximum).
EQ:
Adjust the tone of the external microphones.
4 Select whether to amplify the sound
from the external microphones in
your location.
Change the setting from the "PA MICROPHONE
SOUND OUTPUT TO SPEAKER" drop-down list
as necessary. This setting is applied to both the L
and R terminals.
Setting Description
MICROPHONE Sets to the microphone level.
LINE Sets to the line level.
Setting Description
THRU Does not change the tone.
LOW CUT Turns down the low pitch
sound.
LOW BOOST Turns up the low pitch sound.
Select
Setting Description
ON Enables amplifying the sound
in your location.
OFF Disables amplifying the sound
in your location.
Select