Specifications

CVP-109/107/105/103/700

NVoltage Selector

Before connecting the AC power cord, check the setting

of the voltage selector which is provided in some areas.

To set the selector for 110V, 127V, 220V or 240V main

voltages, use a “minus” screwdriver to rotate the selector

dial so that the correct voltage for your region appears

next to the pointer on the panel. The voltage selector is set

at 240V when the unit is initially shipped.

After the proper voltage has been selected, slide the AC

power cord over the rear panel and connect the cord to the

AC INLET, then connect the other end of the cord to an

AC wall outlet. A plug adaptor may be also provided in

some areas to match the pin configuration of the AC wall

outlets in your area.

CAUTION

• An improper voltage setting can cause serious damage to the CVP-

103 or result in improper operation.

MSet the adjuster.

For stability, an adjuster is provided on the bottom of the

pedal box (C). Rotate the adjuster until it comes in firm

contact with the floor surface. The adjuster ensures stable

pedal operation and facilitates pedal effect control. If the

adjuster is not in firm contact with the floor surface, dis-

torted sound may result.

• A voltage selector is provided in some areas.

6 7

240

127

110

220