Specifications

CVP-109/107/105/103/700

CAUTION

• Be careful not to confuse parts, and be sure to install all parts in

the correct direction. Please assemble in accordance with the

sequence given below.

• Assembly should be carried out by at least two persons. At-

tempting to assemble alone is dangerous.

• Be sure to use the correct screw size, as indicated above. Use

of incorrect screws can cause damage.

• Be sure to tighten up all screws upon completing assembly of

each unit.

• The entire package must be turned over during assembly, so

select an area that is large enough for the unpacking and as-

sembly operation.

Z Open the carton and remove the parts from

the upper level.

Referring to the illustration, make sure that you have all the

required parts.

● Cord holders x 2

● AC power cord

• A bench may be supplied or optional, depending on

the location in which the instrument was purchased.

5 x 20 mm long screws x 20

CVP-700: Assembly

● Front leg A

● Front leg B

● Rear leg C

● Pedal box D